A R P a N E L, MAC Vidcip | Pico Macom PR3200 specification

R E A R P A N E L

FRONT & REAR PANEL

	70 MHz	FLAT	COMP
IN	IF LOOP OUT	VIDEO OUT	VIDEO OUT VIDEO	AUDIO
	INV	NORM

	LNB
950-1750	Power
MHz INPUT	IF GAIN

B/MAC VIDCIP

		600VA MAX	120V
	3/8 A 250V		60 Hz 0.3A
	FUSE
H	V

AC ADAPTOR

PLUG IN CLASS 2 TRANSFORMER

MODEL: D6-1007

INPUT:120V 60Hz 25W

OUTPUT: 18VDC 250 mA

8. RF Input:

Input connection from C-band or Ku-band LNB. ( 950 to 1750 MHz). Also provides +18VDC output if PS-18DCis connected to 10 LNB Power.

9. LNB Power:

This 3.5mm RCA jack accepts the optional PS-18DCLNB power supply voltage.

10. I.F. Loop:

The 70 MHz IN and OUT connectors loop the un-filtered tuner output for possible terrestrial interference filtering. Normally the short jumper is connected and the IF gain is set to maximum (fully CW).

11. Video Invert:

The Normal/Invert switch controls the video polarity of the the output amplifiers. Toggling the switch affects all three video outputs.

12. Flat Video Out:

A one volt peak to peak unfiltered, unclamped and non de-emphasized signal is provided for MAC type decoders.

13. Comp Video Output:

A one volt peak to peak composite CCIR 405-1 525 line de-emphasized, unfiltered and unclamped video signal is provided for the VideoCipher®II decoders.

14. Video:

A one volt peak to peak composite CCIR 405-1, 525 line de-emphasized, filtered and clamped video signal is provided for unscrambled programming.

15. Audio:

Standard RCA connection to feed either a descrambler or a SMATV modulator

16. H/V Electronic A/B Terminal:

A switching +5/-5 VDC voltage is provided between the push terminals to control a PICO MACOM ABE-C/KuH/V switch.

17.Fuse:

Replace this fuse with only one of the same rating as indicated on the chassis.

18.Convenience Outlet:

The AC outlet is capable of delivering up to 600 watts of AC power.

19.Power Cord:

Connect to 108 to 125 VAC, 50/60 Hz electrical outlet.

20.PR-18DC:

Optional power supply to power LNB.

PICO MACOM INC. 12500 Foothill Blvd. • Lakeview Terrace, CA 91342 • (818) 897-0028 (800) 421-6511