General Description

TelexTELEX® COMMUNICATIONS, INC. 12000 Portland Ave. South, Burnsville, MN 55337

Instruction Sheet

ACS-101

AMPLIFIED BROADBAND UHF	PN 803984
COMBINER-SPLITTER

The ACS-101 (Antenna Combiner Splitter 10 to 1) is an amplified and filtered broadband splitter-combiner. It allows up to 10 base stations to use only one transmit and one receive antenna.

The antenna combiner section contains innovative hybrid coupling, amplifying and matching technol- ogy to combine 10 transmitters to 1 output with very low intermod distortion.

The antenna splitter section has broadband input fil- tering and amplification to maintain signal levels through the splitters. High output isolation between ports is also achieved.

The industrial strength power supply of the ACS-101 supplies voltage and current to two outputs on the prod- uct. Each output can supply up to 5 Amps at 12 VDC.

	SPECIFICATIONS
	Overall
Antenna Connectors	.........................................................................................................................Standard TNC Receptacles
AC Input Power	100 - 120 VAC, 60 Hz, 6A max
AC Input Fuse	10 A, 250 V, 3AG
DC Output Power	12 VDC, 5 A for each output
DC Output Jacks	Two, 5.5mm x 2.1 mm Jacks
DC Output Fuses	5 A, 250 V, 5mm x 20 mm
Size	H: 3.50" (88.9 mm) x W: 16.75" (426 mm) x D: 14.63" (372 mm)
Weight	10 lbs., 4 oz., (4.65 kg)
	Antenna Splitter
Frequency Range	614 - 746 MHz
Output IP3	Greater than 30 dBm
Net Gain	0 dB Typical
Noise Figure	Less than 4.5 dB
Minimum Isolation	20 dB between adjacent ports.
	Greater than 20 dB between non-adjacent ports
	Antenna Combiner
Frequency Range	470 - 608 MHz
Net Gain	0 dB (Maximum)
Noise Figure	10 dB Typical
Output IP3	-55 dBc @ + 17 dBm input on each transmitter

ACS-101 Product Features:

·Ideal for use with BTR-1, BTR-500, BTR-600, BTR-700 wireless intercom systems.

·Two power outputs to supply up to 10 transceivers (5 on each daisy-chain run) which makes large systems easier to implement.

·Standard IEC 320 power input connector

·115 VAC or 230 VAC operation

·High-Quality TNC connectors for consistent impedance across the entire frequency range.

·Rack mount brackets included for 19" (482.6 mm) rack

-1-

Instruction Sheet