VBrick Systems ETV v4.2 manual Add Video

2.Click a previously-defined template name.

3.Set the broadcast Duration in minutes (or click No Limit (Stop Manually).

4.Click Start Emergency Broadcast and confirm. (A message will indicate the broadcast is in progress. Any streams currently in progress will be preempted and replaced by the emergency broadcast.) If necessary, click Stop Emergency Broadcast when done.

Add Video

If given publishing permissions, you have the ability to Add Video to any VOD servers for which you have access. The folders to which you can add video are configured by your system administrator. The folder list that you can add video to may also be different from the folders that you can view content from. If you have MPEG-1, MPEG-2, MPEG-4 or WM video content saved on your PC, you can publish this content to the VOD server using the Add Video page. Content acquired by recording with VBrick StreamPlayer Plus or a VBrick VBStar will always ingest and play at a consistent high quality; content acquired from third- party vendors or elsewhere may not. See Supported Stream Types below for more details.

Note MPEG-4 files with closed captions cannot be added to the EtherneTV-NXG Video- on-Demand server until the closed caption track is removed. See "Removing MPEG-4 Closed Captions" in the ETV Portal Server Admin Guide for details.