Ref. # Description

3.Attach the antenna to the surface using the four mounting screws supplied. The o-ring will compress and create a seal between the surface and the antenna.

1Antenna

2Countersink screws

3Mounting surface

4O-ring

5Pre-drilled mounting holes

4.Remove the dust cap from the antenna’s TNC connector.

5.Attach the male TNC connector of the coaxial cable to the antenna’s TNC connector.

Ref.# Description

1Antenna screwed into place

2Surface

3TNC connector (male)

4Coaxial cable (female)

6.Attach the other end of the coaxial cable to the antenna input port of the receiving device. The receiv- ing device must be able to provide power as detailed in the SPECIFICATIONS section of this guide. All NovAtel GPS receivers provide the necessary power through their antenna RF connectors.