HP 8000 manual System Status Error Messages, Table A-11

Error Messages and Codes

Table A-10. (Continued)

Modem Communications Error Messages

Message	Probable Cause	Message	Probable Cause
1202-13	Data block retry limit reached [2]	1210-01	Time-out waiting for SYNC [6]
1202-21	Time-out waiting for SYNC [3]	1210-02	Time-out waiting for response [6]
1202-22	Time-out waiting for response [3]	1210-03	Data block retry limit reached [6]
1202-23	Data block retry limit reached [3]	1210-04	RX exceeded carrier lost limit
1203-XX	Modem external termination test	1210-05	TX exceeded carrier lost limit
1203-01	Modem external TIP/RING	1210-06	Time-out waiting for dial tone
	failure
1203-02	Modem external data TIP/RING	1210-07	Dial number string too long
	fail
1203-03	Modem line termination failure	1210-08	Modem time-out waiting for remote
			response
1204-XX	Modem auto originate test	1210-09	Modem exceeded maximum redial limit
1204-01	Time-out waiting for SYNC [4]	1210-10	Line quality prevented remote response
1204-02	Time-out waiting for response [4]	1210-11	Modem time-out waiting for remote
			connection

NOTES:
[1]	Local loopback mode	[4]	Modem auto originate test
[2]	Analog loopback originate mode	[5]	Modem auto answer test
[3]	Analog loopback answer mode	[6]	Modem direct connect test

A.12 System Status Error Messages (16xx-xx)

	Table A-11
	System Status Error Messages
Message	Probable Cause
1601-xx	Temperature violation
1611-xx	Fan failure

A-12 www.hp.com Technical Reference Guide