5. BOX ADVANCED SETTINGS
Go to MENU/INSTALLATION/BOX SETTING/CHANNEL SEARCH.
5-1 PRELIMINARY/ INSTALLATION CODE
Your Set Top Box is supplied ready to use for a standard configuration. TV : 4/3 format, RGB (Letterbox)
VCR : PAL (none on ITD 58/59/60/68)
Access to the installation screens shown below will enable you to adapt your Set Top Box to your favourite equipment.
The access to main menu is obtained by pressing the MENU key.
You can memorise your selections by pressing the 
key. Return to the previous screen by pressing the BACK key.
Exit from all the screens by pressing the EXIT key.
Use cursor 
to move down to the INSTALLATION line
and press 
to confirm.
Access to the installation menus is protected by a secret installation code to avoid any unintentional misadjustment.
Your Set Top Box is supplied with default code 1234.
Note: you will not be prompted to enter any code, if the installation code is «0000».
Enter your code.
As soon as each value is entered, the segment is replaced by a star.
Using cursor 
of the remote control unit, you can come back to a value that has already been entered and modify it
provided the code has not been confirmed by 
.
After entering the four digits press 
to confirm.
An error message will be displayed if the code you have entered is not correct.
INSTALLATION
ENTER YOUR INSTALLATION CODE THEN PRESS OK TO CONFIRM
- - - -
MAIN MENU
ENTER YOUR INSTALLATION CODE
THEN PRESS OK TO CONFIRM
* * * *
BAD CODE
PLEASE TRY AGAIN
- 7 -