Sagem ITD 60, ITD 68 General Information, Safety, Packing List, Connection to the Mains Supply

Page 7

1. GENERAL INFORMATION

1-1 SAFETY

Use of your Set Top Box is subject to safety measures designed to protect users and their environment. In order to keep the high performance of your Set Top Box, it should:

be located in an indoor place to protect it from lightning, rain and direct sunlight,

be located in a dry and well-ventilated place,

be protected from damp, be installed in a way to avoid violent shocks,

be plugged directly into the mains with the cords provided with the Set Top Box. The use of an extension cord is not recommended,

do not place anything on top of your Set Top Box as this will restrict ventilation.

Be careful

Contact with a liquid would lead to deterioration of your Set Top Box, which could cause failure. Never open your Set Top Box.

Like any electronic device, the Set Top Box contains fragile components. It should thus be installed in a place where it is unlikely to fall and out of reach of children.

The case of the Set Top Box can be cleaned with a soft and dry cloth. Do not use any type of abrasive pad, scouring powder or solvents, such as alcohol or turpentine, as they could damage the surface of the case.

The Set Top Box must be disconnected from mains supply (from wall socket or rear panel) before any modification of connection between TV, VCR or antenna.

Use only the Sagem Communication power adaptator given with the Set Top Box to connect the STB to the mains. Other practice may be dangerous.

Do not forget to put the batteries inside the remote control unit.

1-2 PACKING LIST

Your Set Top Box is delivered with the following components:

a remote control unit,

2 batteries (R6) for the remote control unit,

a scart cord for connection to the TV set (Not available with ITD 58/59/61/68),

AC/DC adapter,

this user’s manual.

1-3 CONNECTION TO THE MAINS SUPPLY

The Set Top Box must be connected by the AC/DC adapter to a 220-240 V wall socket. Turn on the mains power on the wall.

As a safety measure, you can use the power adaptors to cut off the 230V current in case of danger. They must be located near to the device, and must be easily accessible.

Be advised to put your Set Top Box in standby when not used.

- 1 -

Image 7
Contents Digital Terrestrial TV Receiver Before unpacking this product further Quick StartConnection diagram Installation Guide Contents Environment Connection to the Mains Supply SafetyGeneral Information Packing ListFront Panel Description Remote Control UnitBattery installation General DescriptionRCU operation KEY FunctionIntroduction ConnectionsConnection to TV SET, VCR and Antenna Language First Time InstallationFirst Time Installation General InformationChannel Search in Progress CountryAerial Failure PRELIMINARY/ Installation Code BOX Advanced SettingsChannel Search Auto Tune 1 TV AUDIO/VIDEO InstallationVCR Not available on ITD58/59/60/68 Modulator Only ITD60 Reinstallation ResetDigital output Only ITD64 Language Setting User SettingsUser Preferences Creation Locking not available on ITD 58/59/60/68 Changing Installation Code Channel Change Using Your SET TOP BOXProgram Information Available Press Info to display it Extended Program InformationSubtitle language TV Channels ListAudio Language and Subtitle Language Selection Audio languageSleep timer Volume AdjustmentTV Mode Digital Text ServicesEvents timer Enhanced Program Guide not available on ITD 58/60/68 SET TOP BOX Enhancement Radio ModeTroubleshooting Tuner RF Input Outline SpecificationsGuarantee Terms and Conditions Product EnvironmentPackaging Batteries252220355A