Miglia Technology TV Micro Express Adapter Connecting TVMicro Express, II. Installing The Tube

Page 7

I.Connecting TVMicro Express

1.Connect TVMicro Express to a free USB 2.0 port of your Mac. You can use the extension cable if you wish.

2.Connect an antenna or a cable from the CableTV wall outlet.

Note: Portable antenna usually do not give very good reception. Bad reception will be visible when watched on a computer screen. Miglia recommends using CableTV or a roof-top antenna.

II.Installing The Tube

1.Insert the The Tube CD-ROM in your CD/DVD Drive

2.Double-click on ‘Install The Tube’ to launch the installation programme.

3.Click “Continue” when the alert message informing you that the installation package contains a program that verifies if the software can be installed.

4.When asked, select the destination Hard Drive and Folder where you wish to install The Tube. The default selection made by the installer is recommended. Then click “Continue”

5.On the next screen, click “Install”. The installation program will then ask you for your administrator password. This is your normal Mac OS X password you created when you first used Mac OS X and not the software activation code.

TVMicro Express™ User Guide

Page 5

Page 6 Page 8
Image 7
Page 6 Page 8
Contents TVMicro Express Table of contents Introduction and Overview TVMicro Express User Guide Overview Technical Support Package contentsIntroduction System requirementsOverview of TVMicro Express Installing and using TVMicro Express Tube software II. Installing The Tube Connecting TVMicro ExpressIII. Initial setup for The Tube TVMicro Express User Guide Warranty Agreement
Top Page Image Contents