VBrick Systems MPEG-1, MPEG-2, MPEG-4 manual Program Files\VBrick

Page 34

TTo install STB software and/or the download application:

1.Double-click on Setup_STB_x_x_x.exe in the installer folder to launch the installer. Then click Next to continue.

2.Select the features you want to install: the Download Application, the Release Package, or both. Then click Next. (If you select only the Download Application, you will not be prompted to create an FTP user account as explained below.)

3.Select an installation folder for the Download Application and click Next. The default is

C:\Program Files\VBrick\.

4.In this scenario, the installer has detected an FTP server and will create a user account. STBUser is the default name and password for the FTP account. (If you change the default user or password, you will have to enter them manually each time you run a download.) Press Next, confirm, and press Next again (or Skip this step entirely if you do not want to create an FTP account at this time). Note that if an FTP server is not currently installed on the server machine, you may be prompted for the installation disk.

28	EtherneTV Media Distribution System

Image 34

Contents STB v3.7.2d Admin Guide EtherneTV-STB Set Top BoxCopyright FCC Notice About VBrick SystemsContents Serial Port Passthrough Using the Set Top BoxIndex Organization Font ConventionsRelated Documents Installation OverviewUsing the Command Prompt Command Prompt Action TypeInitial Setup Using pmanConnecting to the Network Setting the IP AddressFinding the Dhcp IP Address Assigning a Static IP AddressPAL Configuration Model NumbersConfiguration LoginConfiguration Saving ChangesVideo Settings MCS Location Start ModeReceive Address Local-Fullscreen Mode with MPEG-4 Multicast Main Volume/Line 1 Volume Home Page Location/Home Page EnableLocal UI Location Buffer Check for Underflow Rtsp StreamingData Buffering Seconds Lowest Bitrate for Buffer CheckProxy Type, Http Proxy Host and Port Network SettingsOptions Panel Login Aux1-Aux8Ethernet ManagementDisplay Settings GeneralResolution General SettingsSerial Port Security SystemLanguage System UpdateHardware EtherneTV Media Distribution System Local Configuration Sample Interface in Local ModeUploading from the STB Accessing the XML Configuration FileDownloading to the STB XML Configuration Examples Local ConfigurationExample of live MPEG-4 stream with forced UDP streaming Example of MPEG-1 unicast entry with port address KeywordMp2 stream/Keyword Vod content keyword Stream Installing the Download Application System UpgradeUpgrading from v3.71 or Higher \Program Files\VBrick\ Before You Begin Running ETV-STBDownloadUpgrade using the SAP Editing a Configuration File Logging Upgrade Activities Upgrading from v3.70 or Lower Using a Web Browser to Run the UpdateCreating an FTP Server with IIS Removing Lock Files Additional Upgrade Steps for Local Mode Verifying the File TransferEtherneTV Media Distribution System Serial Port Passthrough How Passthrough WorksUsing Telnet Serial Port PinoutsSerial Port Passthrough EtherneTV Media Distribution System Start Mode Using the Set Top BoxLocal Mode Local-Fullscreen Mode Local ModeMCS Mode Using the IR Remote MCS ModeUsing the Wireless Keyboard VODAccessing the Web Icon DescriptionIcon EtherneTV Media Distribution System Index Index