Technicolor - Thomson EFC031 manual Remote control TV functions

06-EFC031-EN.qxd 4/07/05 18:45 Page 4

Getting started

Remote control TV functions

Most of your television’s functions are available via the menus that appear on the screen.The remote control supplied with your set can be used to navigate through the menus and to configure all the general settings. It also provides control functions for most DVD players and for recent VCRs from the Thomson, Saba, Brandt, Ferguson, and Telefunken brands.The remote control and its functions may vary depending on the model of television.The rest of this page contains the description of the most comprehensive remote control. Optional remote control features are indicated by the symbol O.

EN

BStandby / quit standby.

ODVD To access DVD mode.

O VCR	To access VCR mode.
O TV	To access TV mode.
	Press this button to control the television. If you do not have
	this button on your remote control, it means that you can
	access the TV functions directly, without pressing a button
	beforehand.

Olight To provide information:

-it lights up when you press a button,

-it indicates the status when the remote control is being programmed (see page 5),

-if the batteries are run down, it flashes when you press a button.

+/-	To control the volume.
	This function is also available in VCR and DVD modes.
	To switch the sound off and back on again.
RETURN	To return to the previous menu.
PR+/PR-	To change channels.
EXIT	To close a menu.
MENU	To access the OVERVIEW menu.
	To select menu options.
	To set functions, change values, enable and disable functions.
	4/3 models: to select the picture format
	16/9 models: to select the zoom function.
OK	To confirm a selection.
	Coloured buttons:
PRESETS	(red button) image and sound presets.
Zzz/LIST	(green button) sleep timer.
INFO	(yellow button) status information.
GUIDE	(blue button) disabled in TV mode.
TEXT	(purple button) Teletext.

The coloured buttons can also be used for operating Teletext.

0-9 To select a channel by its number.

In the case of channel numbers with two digits:

-press the two digits quickly, or

-press 0 twice to display “--”, then enter the channel number.

AV	To select an appliance connected to an AV socket.
O RADIO	Not active.
REV-PLAY	Play and record functions for VCRs,
FWD-STOP
	play functions for DVD players.
PAUSE-REC

Important:

If the batteries in your remote control are run down, you can use the buttons on the front of your set, as they have the same functions as those on the remote control.

4