Adjusting the picture, Picture | Technicolor

06-EFC031-EN.qxd 4/07/05 18:45 Page 9

Operation

Adjusting the picture

The PICTURE menu can be used to adjust the current settings, to apply preset settings and define your own preferred settings.

Display the OVERVIEW menu by pressing the MENU button.

Select the Picture option and press OK to confirm.

The PICTURE menu appears. It offers the following options:

PICTURE
Return
Picture preset	Standard...
Brightness
Colour
Contrast
Black expand	High
Tone	Warm
Sharpness
Noise reduction	Low
NTSC Tint

Picture preset: use the buttons to select from the preset settings EN offered (Standard, Film, Sport, Studio, Personal) the one which suits best

the programme you are watching.

The Personal option contains the values you have defined for all the settings.

Note: whenever you modify a value, the Picture preset option displays Personal and your settings are stored as your new personal settings. This line is not available in PC mode.

Brightness, Colour, Contrast: adjust these settings as required using the buttons.

These settings are automatically stored under Personal in the Picture preset option.

Black expand: lets you adjust the contrast to suit ambient lighting (Maximum, Medium, Minimum, or Inactive). Use

the buttons to choose the desired option.

Note:This line is not available in PC mode.

Tone: this function is used to adjust the colour balance.

Choose Warm, Neutral, or Cold using the buttons.

Sharpness: adjust this to suit your preferences using the buttons.

Note:This line is not available in PC mode.

Noise reduction: improves picture quality when reception is difficult.

Select an option from the list using the buttons.

Note:This line is not available in PC mode.

NTSC Tint: this option is only available for NTSC audio-visual sources. It can be used to adjust the picture’s tint.

Note:This line is not available in PC mode.

If you use the LCD TV set in PC mode, the PICTURE menu allows access to the following functions:

Auto-adjustment: this function is used to automatically adjust the Phase and Clock functions. Press OK to start the adjustment process and wait until Done appears.

Phase, Clock: adjust these settings as required in order to enhance picture quality.

Horiz. position: use the buttons to move the picture horizontally on the screen.

Vert. position: use the buttons to move the picture vertically on the screen.

Press EXIT to close the menu.To return to the OVERVIEW menu, select Return and press OK to confirm.

In TV mode you can press the red button to access directly the list of preset settings.You can then select a preset setting by

pressing the buttons.

Press EXIT to close the menu.