Extron electronic WMK 100 Final installation, Specifications are subject to change without notice

Page 4
Figure 7— Attach WMK 100 cover
2.5"
(6.35 cm)
PVS305SA

WMK 100 Installation Notes, cont'd

5.Final installation.

a.After completion of cabling, place the cover over the installed plate, and secure at each corner with the provided 6-32 button head screws.

NEnsure any cables exiting the box (e.g., to display device and external electrical outlet) pass through a raceway knockout.

b. Switch on the display device, control device, signal sources and adjust and configure the system as needed.

For full configuration and setup details, refer to the PoleVault System Installation Manual, the MLC 104 Plus Series Reference Manual, and the PVS 305SA User's Manual, all available online at www.extron.com.

General Specifications

Mounting

 

Wall mount

Yes, with included hardware

Maximum load capacity

15 lbs (6.8 kg)

Material

Steel

Dimensions

 

Base plate

12.8" H x 12.8" W x 0.5" D (32.5 cm H x 32.5 cm W x 1.3 cm D)

Cover

13.0" H x 13.0" W x 2.5" D (33.0 cm H x 33.0 cm W x 6.4 cm D)

Product weight

4 lbs (1.8 kg)

Shipping weight

6 lbs (3 kg)

Vibration

ISTA 1A in carton (International Safe Transit Association)

Regulatory compliance

 

Safety

c-UL, UL

Warranty

3 years parts and labor

NSpecifications are subject to change without notice.

Both Sides

Top View

12.83"

(32.59 cm)

Side View

Both

 

 

Sides

12.83"

13"

 

(32.59 cm)

(33.02 cm)

Base

Both Sides

13"

(33.02 cm)

Side View

Extron USA - West

Headquarters

+800.633.9876

Inside USA / Canada Only

+1.714.491.1500 +1.714.491.1517 FAX

Extron USA - East

+800.633.9876

Inside USA / Canada Only

+1.919.863.1794 +1.919.863.1797 FAX

Extron Europe

+800.3987.6673

Inside Europe Only

+31.33.453.4040 +31.33.453.4050 FAX

Extron Asia

+800.7339.8766

Inside Asia Only

+65.6383.4400 +65.6383.4664 FAX

Extron Japan

+81.3.3511.7655 +81.3.3511.7656 FAX

Extron China

+400.883.1568

Inside China Only

+86.21.3760.1568 +86.21.3760.1566 FAX

Extron Middle East

+971.4.2991800 +971.4.2991880 FAX

4

© 2009 Extron Electronics. All rights reserved.

Image 4
Contents Mount the base plate Maximum load for the WMK 100 is 15 lbs 7 kg1A. To mount the WMK 100 onto masonry walls Proceed to StepIf using toggle assemblies see for installation method Mount the switcher and power supply1B. To mount the WMK 100 onto a non-masonry wall Cable the switcher 3B. If using a surface racewayRun cables 3A. If running cable behind the wallsFinal installation Specifications are subject to change without notice