PC Function
The unit’s screen can be used as your computer’s monitor.
111Shut down PC and this unit, connect the VGA jack and PC Audio In jack with a 15
222Turn on both units and use the SOURCE button to select VGA
Important Notice
•• There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast of your PC until the picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.
•• The synchronization input waveform for Horizontal and Vertical frequencies are separate.
•• We recommend using under 5m of cable. This provides the best picture quality.
System Setup Menu
Some of the PC features can be preset through the setup menu, please read this section carefully.
•• Press MENU to display the system menu window.
•• Press the left/right direction button to select the desired menu, press the down direction button or the OK button to enter.
While working with the menu,
Always use direction buttons to select an option, press OK to confirm. Press MENU to back up/exit the setup menu, or press EXIT to quit.
Adjust the PC Screen via System Menu
Upon switching to the PC mode, the moniter will be automatically regulated for a proper functioning. If the result is not up to your expectation, please adjust the moniter manually via the "Computer Settings" menu which is listed under the "Settings" menu.
16