Unit View
Unit View
| VOLUME +/- |
| Adjust the sound |
| output level. |
TFT |
|
Screen | CHANNEL +/- |
| Skip channels. |
| MENU |
| Display the system |
Unit Stand | setup menu. |
| SOURCE |
| Select a desired |
| working mode. |
| POWER |
Remote Control Senser | Turn the unit on/ |
Sense the remote control | off(standby). |
signal. | NOTE: The unit enters into the standby | |
| ||
| mode after being turned off with the | |
Power Indicator | POWER button, and it still consumes | |
power in the standby mode. | ||
Lights bright blue when TV is on, | ||
Unplug the power cord from the outlet | ||
it will dim when TV is turned off | ||
completely when it will not be used for a | ||
(Standby mode). | ||
long period of time. | ||
|
Mounting
Thread x 4.
“SERVICE ONLY” is for the engineering use merely and not supposed to be utilized by a finial user.
For more specific details on connector pannels, please read the Cable Connection section
Screw X3 These screws are connecting the TV case to the unit stand.
Wall Mounting - Attach the TV case to the wall
•• This unit can be deliveried to a final user either as a wholly assembled product or with the TV case detached from the unit base, depending on different packing methords. When you get the unit as a fully assembled product, you need to remove the unit stand first before wall mounting, To detach the unit base, release the fixing screws.
•• Use the VESA standard mountings to fix the TV case on the wall. Take care when mounting, it may cause damage or serious injury should it fall from its mountings. See the Specification page for VESA informaiton. A variety of mounts are available in your local retailer, see instructions when installing the unit. An adequate space is necessary for this installation. Screws used for mounting purposes shall not exceed 10mm in length.
3