Installation Instructions |
TOOLS / PARTS FOR INSTALLATION
|
|
| B (4) |
|
|
| M8 x 25mm |
|
|
| C (4) |
|
|
| M6 x 16mm |
| A (1) |
|
|
| [Interface | D (4) |
|
M5 | Bracket] |
| |
(Included) |
| [Mounting | E (1) |
| Button] | ||
|
| M5 | |
|
|
|
ASSEMBLY AND INSTALLATION
NOTE: For mounts with the Chief 14"x14" interface, proceed
to Step 1.
NOTE: For Fusion or rail mounts, proceed to Step 2.
1.Attach mounting buttons (D) to interface bracket (A) using four M8 x 25mm button head cap screws (B) and the M5 hex key (E). (See Figure ) Proceed to Step 3.
(D) | (A) |
1 | (B) x 4 |
3.Attach interface bracket (A) to back of display using four M6 x 16mm Phillips cap head screws (C). (See Figure 2)
| (Chief 14"x14" interface |
| version shown) |
| (A) |
3 | (C) x 4 |
Figure 2
4.Complete the installation following the mount installation instructions.
Figure 1
2.Attach the interface bracket (A) to the mount’s vertical uprights using four M8 x 25mm button head cap screws (B) and the M5 hex key (E).
3