Datamax VMP-2000 manual Power Supply, Guidelines, Requirements

Page 15

Data Connection

Power Supply

The VMP can run solely from a power supply. For more information, see Input Power and Connection Requirements on page 8. Use only the Datamax-O’Neil approved power supply.

Power Supply

Requirements

•Use the Datamax-O’Neil recommended power supply. FAILURE TO USE A DATAMAX-

ONEIL WILL RESULT IN DAMAGE TO THE PRINTER OR THE PRINTER WILL NOT OPERATE PROPERLY.

Note: The operating temperature of this portable printer is 50° C. However, the operating temperature when used with Datamax-O’Neil power supply for charging the portable printer is limited to 35° C. Please charge the printer in a suitable location that meets this temperature requirement.

Guidelines

•Do not install cables or connections near wet areas.

•Do not install cables near, or around, sharp edges.

•Do not install cables near heat sources.

•Do not install cables at “pinch locations” (for example, near doors or under a seat).

Datamax-O’Neil VMP-2000 Installation Guide

13

 

Page 14 Page 16
Image 15
Page 14 Page 16
Contents VMP-2000 Table of Contents Liability Statement Safety GuidelinesFor Vehicle Installations and Use General Operation and Handling GuidelinesCare and Prevention CopyrightIntegrated Dash Mount Mounting OptionsWall Mount Horizontal MountMounting Guidelines Other Mounting Requirements Mounting Guidelines Volt DC Jack Cable white Power applied Input Power and Connection RequirementsPrinter Input Power and Connection Requirements Fuse Box Power CableAlternate Cabling Power Extension Cable Requirements Existing Power Harness InstallationCigarette Lighter Adapter VMP Connector Mating ConnectorData Connection Power Supply GuidelinesRequirements Ribbon Information TemperaturePrinter Settings Print Head CenteringSkip Over Perforation Fastening Multi-Part Forms Media SpecificationsContinuous Form Specifications Paper GuidelinesPaper Size and Print Area Form SpecificationsRadio/Bluetooth Guidelines
Top Page Image Contents