Datamax VMP-2000 manual Form Specifications, Paper Size and Print Area

Page 19

Media Specifications

Form Specifications

Print Area Diagram

Symbol

Description

APaper Length: 11 inches (typically) (279.4 mm)/11.69 inches (A4)(297.0 mm)

BPaper width: 3” minimum - 9.5” maximum

CFirst dotline: 11.8 mm

DHole spacing: 12.7 mm + 0.5 mm

EVertical Character Alignment Tolerance:

For adjacent line:

0.3 mm maximum in bi-directional printing

For 10 lines: 1.5mm maximum

FMaximum Print Width: 200.7 mm

G6.35 mm

I2 mm maximum

JFirst printable line with Top of Form (TOF): Shall be set manually

K/L	K:15 mm/L: 25 mm (Where any dark print and punch holes are prohibited. Will
	cause paper out condition.)

Datamax-O’Neil VMP-2000 Installation Guide	17

Image 19

Contents VMP-2000 Table of Contents Liability Statement Safety GuidelinesFor Vehicle Installations and Use General Operation and Handling GuidelinesCare and Prevention CopyrightIntegrated Dash Mount Mounting OptionsHorizontal Mount Wall MountMounting Guidelines Other Mounting Requirements Mounting Guidelines Volt DC Jack Cable white Power applied Input Power and Connection RequirementsFuse Box Power Cable Printer Input Power and Connection RequirementsAlternate Cabling Power Extension Cable Requirements Existing Power Harness InstallationCigarette Lighter Adapter Mating Connector VMP ConnectorData Connection Guidelines Power SupplyRequirements Ribbon Information TemperaturePrint Head Centering Printer SettingsSkip Over Perforation Fastening Multi-Part Forms Media SpecificationsContinuous Form Specifications Paper GuidelinesPaper Size and Print Area Form SpecificationsRadio/Bluetooth Guidelines