Installation Instructions
6
2 | x 1 |
3
1x 2
Removing Spring to Tilt Display
1.Remove and keep two Phillips screws from plastic cover on
2.Remove and keep one Phillips screw from latch.
3.Lower latch to remove spring.
4.Return latch to original position.
5.Store spring in plastic cover.
6.Reinsert screw holding the latch.
7.Reinstall plastic cover using two screws removed in Step 1.
8.Use the down arrow button on the remote control (J) to tilt down the display. The display should now tilt down fully.
3
6 | x 1 |
4
5
Spring
7 | x 2 |
12