American Innovative 3545, 7045, 7000, 7506, 3500 installation instructions Bracket Assembly

Page 8

Bracket Assembly

Page 7

 

 

Before beginning the assembly of your arm, be sure to select a secure mounting surface by configuring your FLEXmountTM

Loosen

3 Screws

Step 2

Step 3

Slot

Slot

Step 4

M3 M3x16

Nuts Screws

Step 1

Carefully remove the stand from the monitor by loosening the 3 screws using the M2 allen wrench. Slide the stand off of the monitor toward you.

Attach the tilt mechanism to the adapter plate using four (4) #10-32 x 3/8” Flat Head Philips Pan screws.

Align the tilter and apple adapter bracket with the extrusion on the back of the monitor; sliding it into the slot on the bracket.

Attach the Apple bracket to the monitor using the (3) M3 x 16 Socket Head Screws. *You will need to press down on the bracket in order to line up the holes. (This is intended as it assures a snug fit for your monitor). Using the M3 wrench provided, tighten the M3 nuts. (Be sure the rounded part of the nut is facing upward).

Step 5

Use the M3 wrench to lock the (2) M3 nuts on the slide bar.

Image 8
Contents Installation Instructions How to place an order Hardware Parts List Arm Hardware Parts List FLEXmount FLEXmount Set-up Options Wall/Reverse Wall Mount Special Mounting Scenarios Bracket Assembly Arm Assembly Cable Management StepAdjusting your LCD arm Adjusting TiltWall Mounts Keyboard Mounting Stands