American Innovative 3500, 7045, 7000, 7506, 3545 installation instructions Arm Assembly

Arm Assembly	Page 8
Step 1
	After the mount is securely fastened, insert the shaft of the arm into the mount
	cup. For the example the Through-Desk configuration was used.

Step 2

After securing the bracket to the flat panel monitor, insert the shaft of the tilt mechanism into the forearm.

Step 3

Fasten the 10-32 x 3/8" Philips Flat Head screw and washer into the hole in the bottom of the tilt mechanism to secure the monitor onto the arm.