Polk Audio DR-3 instruction manual

Page 5

20.TUNE-/SUB TTL – Use to manually tune the radio on the Digital Solution system. Acts as the Subtitle toggle switch on DVD play- ers. For the function on other devices see the chart on page 6.

21.SELECT – This button selects a choice on a menu such as the set up menu of a DVD player or the title menu of a DVD disc. With DSS and cable boxes it acts to call up “Favorites.” It has no function with the Digital Solution preamp/processor.

22.AUDIO – This button toggles through the available audio tracks on a DVD. For example, if a DVD disc has a 2 Channel audio track, a Dolby Digital 5.1 and a French language track, each time you push this button, the next available audio track will play. This eliminates the hassle of going back to the DVD’s main menu to change the audio type. This feature may not work with all DVDs and players.

23. NAVIGATION – These buttons allow you to move among setup menus to select operations. For example if you are looking at a DVD’s main title menu and you want to move to the Scene Selection menu, push the appropriate arrow button to move to the Scene Selection graphic on the TV screen.

24.BK SLOW – With most DVD players, use this button to make the DVD play at a slower than normal speed backwards.

25.SLOW – With most DVD players, use this button to make the DVD play at a slower than normal forward speed.

26.ANGLE – Acts to toggle between available camera angles on selected DVDs. Acts as the “Live TV” button on TIVO-type boxes.

27.ZOOM – This button serves as the “Zoom” button with DVD players that have a zoom feature.

28.Program Area – These four buttons allow you to program in the codes for other remotes or “teach” the remote specific commands. They cannot be reprogrammed for any other functions. See pages 7 - 11 for specific programming instructions.

29.SOURCE POWER – This button acts as the on/off button for the other components in your system once you have entered their remote codes into the DR-3. See pages 7 - 11 to learn how to pro- gram the DR-3 to operate other devices.

30.SYSTEM POWER – This button turns on and off the Digital Solution system only. This function does not change when you enter program codes for other devices

31.MACRO – The MACRO button can send out a sequence of up to 20 commands with one button press. It can be programmed for up to eight Source buttons. This allows you to perform multi-step operations with just one button-push. For example, you can pro- gram the MACRO button to turn on the TV, turn on the DS system, turn on the DVD player, select the correct Video input, and open the DVD drawer with the push of just one button. See pages 12 - 13 for Macro programming instructions.

21

23

22

24

29

30

20

26

27

25

28

31

www.polkaudio.com

5

Image 5
Contents DR-3 Introduction Polk Audio Limited WarrantyVOL DR-3 Remote Guided TourStop Page Button Name DR-3 Function ListManual Three-Digit Code Method Programming the RemoteFinding the Three-Digit Code Number for a Device Auto Search MethodTeaching Method To Erase All the Learned Commands One Source/Device Mode Erasing a Learned Command From a ButtonRestoring Factory Programming Erasing All the Learned Commands All Device ModesTo Erase a Macro Sequence Macro OperationProgramming the Macro Button Macro Sequence Programming Example Factory ResetManufacturer/Brand Set-Up Code Number Setup CodesVCR Aiwa RM2070-1