Niles Audio RCA-TT Connecting the Sensor Cable to the TABLE-TOP Sensor, Removable Connector Plug

Page 8

INSTALLATION (CONTINUED)

STEP 3 – CONNECTING THE SENSOR CABLE TO THE TABLE-TOP SENSOR

Pull out the removable connector from the bottom of the table-top sensor. Insert each wire into the appropriate hole on the removable connector plug (Figure 3), and snap the locking tab down. To help you, the connector plug is keyed. Insert the smooth side of the connector plug into the smooth side of the socket. Don’t force the scalloped side of the connector plug into the smooth side of the socket.

Figure 3: Removable Connector Plug

TECH TIP: Wire size is expressed by it’s AWG (American Wire Gauge) number. The lower the AWG number, the larger the wire, i.e., 20 AWG wire is physically larger than 22 AWG.

6

Image 8

Contents RCA-TT Table of Contents CongratulationsContents IntroductionInstallation Considerations Getting Started InstallationTools Required Connection Hub Placement Placing the Connection HUBConnecting the Sensor Cable to the Connection HUB MSU140 InstallationConnecting the Sensor Cable to the TABLE-TOP Sensor Removable Connector PlugConnecting the 12VDC IN-LINE Power Supply and Microflashers Installing Sensor ConnectorInstallation Mounting a Microflasher to A/V Components Mounting the Connection HUB Make sure that your system tested OK before proceedingRemoving Sensor Connector Connecting Power Supply and Flashers Running the Sensor CableReconnecting the Connection HUB Normal OperationOptional Accessories Additional SensorsAdditional Microflashers Status Feedback Wall AdapterRunning Sensor Cable in NEW Construction Scheduling and PreparationSafety First DrillingConcealing Sensor Cable in Existing Walls Pulling the CableUnobstructed space for sensor cable Routing Wire Around a Door Specifications MF1Limited Warranty Warranty Registration Card Dr. Miss Mr. Mrs. MsL e s a u d i o C o r p o r a t i o n