Model, Description | Xantech 48095D instruction

MODEL

48095D

Dinky Link™ Surface Mount

Plasma Proof IR Receiver

INSTALLATION INSTRUCTIONS

DESCRIPTION

These small IR receivers have been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers, etc. – anywhere an inconspicuous appearance is desired. The high sensitivity of these receivers allows placement behind speaker grilles and still receive IR commands up to 20 feet away.

FEATURES

•Very small package, only 2.45”L x 0.45”W x 0.35”H.

•Wire channel for clean installation.

•System testing red-talk-back LED.

•Includes 3-Terminal Block for easy extension to remote room locations.

SPECIFICATIONS

•Infrared carrier frequency bandwidth: 30 - 100kHz.

•Reception range: Up to 30 feet, depending on conditions.

•Nominal reception angle: 55 degrees off axis.

•Cable requirements: See “INSTALLATION” below.

•Max. transmission length: 1 mile using 18 gauge wire.

•Maximum current output: 100mA

•Drives IR emitters through Xantech Connecting Blocks, Controllers, etc.

•Dimensions: 2.45”x0.45”x0.35” (63mm x 12mm x 9mm)

•Power requirements: +12VDC, 20mA.

3.5mm mini plug	Signal Name
TIP	SIGNAL
RING	GROUND
SLEEVE	+12VDC

INSTALLATION

QUICK-START

A typical system will use an IR receiver, several emitters, and a power supply all connected to a connecting block.

1. Connect the IR receiver to the “IR RCVR” port on the connecting block. The ‘red’ connector is installed to the ‘red’ plug.

Note: In some extended distances, additional 3-conductor may be required and can be connected to the terminals on the connecting block.

2.Connect the Emitters to the connecting block. The ‘yellow’ connector is installed to the ‘yellow’ plug.

3.Connect the power supply to the connecting block.

4.Installation complete

REMOTE ROOM APPLICATION

One application is to locate the IR receiver in a remote room. This will give the end-user the ability to control audio/video equipment from a location where the remote control no longer has the ability of direct line-of-sight.

The IR receiver will need the 3.5mm stereo type mini plug removed to extend the wire run to the connecting block. A 3-terminal block is supplied to connect the IR receiver to the connecting block with a 3-conductor inter-room cable in between.

The 3-conductor inter-room cable (24 gauge up to 200’, 22 gauge up to 600’, 20 gauge up to 2000’, 18 gauge up to 5000’), is run to the main room.

While it is possible to make wired connections without the connecting block, it is not recommended. The connecting block reduces installation time, helps to eliminate errors, allows easy troubleshooting and permits easy system upgrades later, if needed.

48095D specifications

The Xantech 48095D is a versatile and advanced audio/video distribution amplifier designed to meet the needs of both residential and commercial environments. This device is built to support a wide range of applications, providing seamless connection and reliable performance for audio and video signals. With a focus on enhancing system functionality, the 48095D offers features that cater to professional installers and tech-savvy consumers alike.

One of the standout features of the Xantech 48095D is its ability to distribute high-definition video signals to multiple outputs without compromising quality. This unit supports resolutions up to 4K, ensuring that users can enjoy crystal-clear visuals whether for home entertainment, presentations, or live events. With its ability to handle HDMI signals, the device incorporates advanced technologies like HDCP compliance and EDID management, which are crucial for maintaining audio and video fidelity across multiple devices.

The 48095D comprises eight outputs, allowing it to connect multiple displays or projectors, making it ideal for setups in conference rooms, classrooms, or multi-room media systems. The built-in signal amplification technology ensures that users experience optimal performance, tackling issues like signal degradation that can occur over long cable runs.

Furthermore, the Xantech 48095D is equipped with robust cooling mechanisms to ensure reliable operation during extended use. It is designed to withstand the rigors of daily use, making it a dependable component for professional audio-visual systems.

Installation of the 48095D is user-friendly; it comes with clear labeling on the ports and includes multiple control options. Users can integrate the device into existing systems easily, whether they are utilizing remote control options or hardwired installations.

In terms of design, the Xantech 48095D boasts a sleek and compact form factor that enables convenient placement in various settings. Its durable construction is built to last, ensuring that users make a long-term investment in their audio/video distribution needs.

In summary, the Xantech 48095D merges advanced technology with practicality, providing an effective solution for distributing high-quality audio and video signals to multiple destinations. With features like 4K support, signal amplification, and user-friendly operation, it is a top choice for professionals and enthusiasts looking to enhance their multimedia experience.