Xantech MX88VI, MX88AI Connections, Common network system for the MX88vi/MX88ai

Page 2

CONNECTIONS

The MX88vi and MX88ai must be connected to a network. A wireless Ethernet router is preferred so that a wireless tablet, such as the Apple iPad can be used. While a personal computer is not a necessity for the installation, it is good idea to connect it to the Ethernet router for the initial network configuration.

MX88vi/MX88ai Rear

Cat 5

PC Computer

Wireless Router

Wi-Fi Tablet

Figure 2: A common network system for the MX88vi/MX88ai

Before the MX88vi/MX88ai is powered on, be sure the wireless router is powered on and that the CAT5 wire is connected to the MX88vi/MX88ai. Also, be sure the wireless internet-ready tablet is connected with the wireless router.

- 2 -

Image 2
Contents Installation Instructions IntroductionConnections Common network system for the MX88vi/MX88aiNetwork Configuration Overview HOW to Pick a Static IP AddressSetting UP a Static IP Address How to start the Mrip Installer applicationMrip Installer Utility IP Setup Using the WEB-BASED User InterfaceUpdating the Mrip Firmware