More questions and answers are available from our website.
Just visit the support site at: www.MODIX.co.kr
Why can't I see the drive in the file manager after I reboot my computer?
① Make sure the assembled HDD is installed correctly, and that the USB cable is connected to your computer. ② It may because the USB 2.0 driver is not installed correctly.
Driver is not displayed or an..! Icon is displayed to the left of the driver in the device manager. ① Player is not connected properly. Check that the USB cable is fully inserted into the USB port. ② The support software is not properly installed. UNINSTALL the USB driver once and reinstall it again.
Why can't I see the drive in the file manager after installing the USB 2.0 driver under Windows 98 ?
① Click the "start" icon located in the lower left corner of the Windows task bar. Click on "Settings", then "Control Panel". Select and click on "System" in the "Control Panel" window.
②From the "System Properties" window, click on "Hard disk controllers". Select the new HDD unit with the right mouse button to view the "Properties" screen. Select "Disable this hardware profile" in "Device usage". Click "OK".
I got a message that "The generic USB Hub is a
In order to reach USB 2.0 speed, you must have a computer or host adapter card that has USB 2.0 support.
TV is blank screen or distorted?
Be sure to set the TV to the correct video input type(AV Mode) and channel. Refer to the equipment owner's manual for detail. And press N/ P button repeatedly to show the normal screen by this time until you see the menu again.
My picture is in black and white?
Enter the setup menu and go to the video menu and change the settings here to fit your TV screen, this usually happens if the player is set to use
- 33 -