Intro playback for CD/VCD discs | Farenheit Technologies TID-360

Repeat A-B function

1.During playback, press A-B button on the remote control at the starting point of the section you want to repeat (point A).

2.Press A-B button again at the ending point of the section you want to repeat (point B). Section A-B repeating starts.

3.Press A-B button again to cancel the A-B repeat function.

Random playback (for CD/VCD/MP3 discs)

During disc playback, press the RDM button on the RC to start random playback of the disc. Press again to cancel.

Intro playback (for CD/VCD discs)

You can play the beginning of every track for 10 seconds in sequence. Press the INT button on remote control to start intro play of whole disc. Press again to cancel.

PBC (Playback Control) function (for VCD only)

If you insert a VCD with PBC, playback starts from the beginning of the 1st track automatically.

1.Long press PBC/STOP button to activate interactive menu on screen during playback.

2.If the menu consists of titles, you can select a desired one using the / buttons.

3.The VCD starts playing the selected title automatically or press PLAY/ PAUSE button to confirm the selected track for playback.

Programming the playback

1.Press PROG button on the RC to enter program list.

2.Use,,, buttons and digit buttons to enter the number of the desired track to be on selected position.

For DVD and File disc, select title and

chapter number.

For VCD and CD, select track number.

3.Press PLAY/ PAUSE button to play, or move the cursor to select PLAY and press ENTER to play.

4.If you want to delete the list, move the cursor to CLEAR, press ENTER to delete all the list set before.

5.Press PROG again to exit program play.

Selecting different audio modes

zFor DVD disc: press AUDIO on the RC repeatedly to select the audio language to listen (if the disc supports multi-language mode).

zFor VCD disc: press AUDIO on the RC repeatedly to select the following modes:

L R STEREO (Channel left => Channel right => Stereo).

Page - 17