Wiring Connections

Make sure you have good chassis ground. A good ground connection will eliminate most electrical noise problems. A good

chassis ground requires a tight connection to the vehicle’s metal chassis. The area around the ground connection should be clean, bare metal without rust, paint, plastic, dust, or dirt for a good electrical connection.

**TV antenna is for TID-360T only.

Caution: Do not interchange the connection of the wiring!!!

For some car models you may need to modify wiring of the supplied power cord. Contact your authorized car dealer before installing this unit.

Using the ISO Connector

1.If your car is equipped with the ISO connector, then connect the ISO connectors as illustrated.

2.For connections without the ISO connectors, check the wiring in the vehicle carefully before connecting, incorrect connection may cause serious damage to this unit.

3.Cut the connector, connect the colored leads of the power cord to the car battery as shown in the color code table below for speaker and power cable connections.

Location Function

Connector A

4Battery 12V (+)/yellow

5Auto Antenna/blue

7ACC+/red

8Ground/black

Connector B

Rear Right(+)---Purple

Rear Right(-)---Purple/Black Stripe

Front Right(+)---Grey

Front Right(-)---Grey/Black Stripe

Front Left(+)---White

Front Left((-)---White/Black Stripe

Rear Left(+)---Green

Rear Left(-)---Green/Black Stripe

Page - 5