To install drivers

THEATER 550.book Page 8 Friday, January 21, 2005 9:31 AM

1Start your system. When the Found New Hardware Wizard comes up, click Cancel. When the System Settings Change window asks you to restart your computer, click No.

2Run the SETUP utility. The SETUP utility will start automatically if you insert the Installation CD-ROM into your CD-ROM drive after the operating system has started. If your CD-ROM auto-run is not enabled or the SETUP utility does not start automatically:

a)Click the Start button in the task bar.

b)Click Run.

c)Select SETUP.EXE from the root directory of the Installation CD-ROM.

d)Click OK.

3Click Install Driver under Software Install.

4Follow on-screen instruction and click Next to complete the installstion.

Note: The Express installation option is recommended. Custom installation allows you to select individual software components for installation.

5When the Setup complete message appears, select Yes, I want to restart my computer now and click Finish.

6After the system reboots, the Found New Hardware message may display the Digital Signature Not Found message. Click Yes or

Continue to complete the driver installation.

Installing Software