Troubleshooting

HD View – NEC-Integrated Receivers

1.If the green LED is not on:

a.Is the receiver correctly positioned in the slot? Are the screws tightened?

b.Is the display turned on?

2.If the LED is on, but there is no picture:

a.Have you selected "Option" as input?

b.Although it is unlikely, please check to see if the dip switches in the back of the unit (behind the black 60-pin connector) are in the correct position. The dipswitches on the unit must be set as follows:

Position 1 2 3 4

State	Off Off On On

3.If the picture is out of focus:

a.Has the correct resolution been set?

-NEC MultiSync® LCD4020, LCD4620: 1360 x 768

-NEC M40, M46 and MultiSync LDC5220, LCD6520, L&P: 1920 x 1080

b.The display has possibly been set up for a different size. Press the “Size“ button on the remote control until “standard“ is displayed in green in the top right-hand side of the screen.

c.Has the unit been tuned properly? [See “Operating and Maintaining Instructions / Tuning]

AC3003A-NEC	Page 3