Sony DVP-NC80V 48kHz/96kHz PCM DVD Video only, To return to the default setting, Size

◆48kHz/96kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio signal.

48kHz/16bit The audio signals of DVD VIDEOs are always converted to 48kHz/16bit.

96kHz/24bit All types of signals including 96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48kHz/16bit.

Note

The analogue audio signals from the LINE OUT L/ R (AUDIO) jacks and 5.1CH OUTPUT jacks are not affected by this setting and keep their original sampling frequency level.

Settings for the Speakers

(SPEAKER SETUP)

To obtain the best possible surround sound, set the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume of the speakers to the same level.

This setting is effective when connecting the speaker with 5.1 CH OUTPUT jacks (page 20).

Select “SPEAKER SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 65).

The default settings are underlined.

SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL(FRONT):
LEVEL(REAR):	OFF
TEST TONE:
FRONT:	LARGE
CENTER:	LARGE
REAR:	LARGE(REAR)
SUBWOOFER:	YES

To return to the default setting

Select the item, then press CLEAR. Note that only the “SIZE” setting does not return to the default setting.

◆SIZE

Selects the size of the speakers.

• FRONT

LARGE	Normally select this position.
SMALL	Select this when the speaker
	cannot reproduce adequate bass
	frequencies.
• CENTER
LARGE	Normally select this position.
SMALL	Select this when the speaker
	cannot reproduce adequate bass
	frequencies.
NONE	Select this if you do not connect
	a center speaker.

Settings and Adjustments

,continued 71