Sony DVP-NC615 operating instructions Precautions

Page 3

Precautions

The power requirements and power consumption of this player are indicated on the back of the player. Check that the player’s operating voltage is identical with your local power supply.

Power requirements and

 

X

 

DVP–XXXX

power consumption t

 

00V 00Hz

00W

0-000-000-00

 

NO.

On safety

Caution – The use of optical instruments with this product will increase eye hazard.

To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further.

On power sources

The player is not disconnected from the AC power source as long as it is connected to the wall outlet, even if the player itself has been turned off.

If you are not going to use the player for a long time, be sure to disconnect the player from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord.

Should the AC power cord need to be changed, have it done at a qualified service shop only.

On placement

Place the player in a location with adequate ventilation to prevent heat build-up in the player.

Do not place the player on a soft surface such as a rug that might block the ventilation holes.

Do not place the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.

Do not install the player in an inclined position. It is designed to be operated in a horizontal position only.

Keep the player and discs away from equipment with strong magnets, such as microwave ovens, or large loudspeakers.

Do not place heavy objects on the player.

For the model supplied with the AC plug adaptor

If the AC plug of your unit does not fit into the wall outlet, attach the supplied AC plug adaptor.

On operation

If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates.

When you move the player, take out any discs. If you don’t, the disc may be damaged.

On adjusting volume

Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is played.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

On cleaning discs

Do not use a commercially available cleaning disc. It may cause a malfunction.

IMPORTANT NOTICE

Caution: This player is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Projection televisions are especially susceptible to this.

3

Image 3
Contents CD/DVD Player Welcome For U.S./Canadian modelsFor customers in the U.S.A Precautions On transporting the player Table of Contents Additional Information Using Various Additional FunctionsSettings and Adjustments Enjoying MoviesExample of discs that the player cannot play About this ManualThis Player Can Play the Following Discs Region codeCorporation. Reverse engineering or Disassembly is prohibitedCopyrights DVD-ROMsIndex to Parts and Controls Front panelH button has a tactile dot When playing back a DVD When playing back a Video CD with Playback Control PBCFront panel display Jack names differ depending on the models Rear panelRemote Number 5 button has a tactile dot+ button has a tactile dot Display Guide to On-ScreenDisplaying the Control Bar during playback Displays Control BarShows the same information as Display 2 during playback Displaying the Control Bar in stop modeFollowing settings can be made Shows the same information as Display 1 during playbackSensor on the player Quick OverviewUnpacking Inserting Batteries into RemoteWhen connecting to a monaural TV TV HookupsIf you want to change the aspect ratio, please refer to Press H Playing a DiscTurn on the TV Press /1 on the player Press a on the player to open the disc trayHooking Up the Player Connecting the Video CordsIf you are connecting to a video input jack If you are connecting to an S Video input jackHookups Connecting the Audio Cords Components to be connected Connection Your setupSelect a connection This connection will use your TV speakers for sound Connecting to your TVCoaxial White Red To coaxial digital input To audio input Decoder Quick Setup Connecting the Power Cord13Press Enter Press X/x to select the setting that matches your TV type10Press X/x to select the type 11Press EnterSet Downmix to Dolby Surround Set Digital OUT to on No additional settings are neededEnjoying the surround sound effects Audio Connection pages 21 toPress a on the player, and place a disc on the disc tray When using an amplifier receiverPlaying Discs Turn on your TV Press /1Light up Additional operationsDiscs Operation Panel displayLocking the disc tray Child Lock Replacing discs while playing a disc ExchangeOpposite direction Watching frame by frame Slow- motion playDisc Scan, Slow-motion Play Search, Freeze Frame Playing DiscsWhile playing a disc, press x to stop playback Player remembers the point where you stopped the discPlay/Multi-disc Resume Resuming playback for the current disc Resume PlayStart playing a Video CD with PBC functions Using the DVD’s MenuPlaying Video CDs with PBC Functions PBC Playback Press TOP Menu or MenuPress Z and place a Data CD on the disc tray Press H Playing an MP3 Audio TrackPress Menu Select an album using X/x and press EnterSelecting an album and track About MP3 audio tracksPlayback order of MP3 audio tracks Structure of disc contentsPlay Various Play ModeSelecting the disc mode One Disc or All Discs Functions Program PlaySelect the title, chapter, or track you want to program When playing a DVDWhen playing a Video CD or CD Press cTo stop Program Play To cancel or change a programWhen playing a Data CD Playing in random order Shuffle PlayTo turn off the Control Bar When Program Play is activatedPlaying repeatedly Repeat Play To return to normal playOn repeats Program Play or Shuffle Play When Program Play or Shuffle Play is activatedRepeating a specific portion A- B Repeat Play Press C/c to select A-BPress Clear If you make a mistake Scene Search modePress Search Mode Select the number of the titlePress Display repeatedly during Checking the Playing Time and RemainingPlayback until TIME/TEXT appears Press Enter repeatedly to change the time informationChecking the information on the front panel display When playing a DVDWhen playing a Video CD without PBC functions or CD When playing a Data CD MP3 audioPress Audio during playback Press Audio repeatedly to select the desired audio signalWhen playing a Video CD, CD, or Data CD MP3 audio Changing the SoundPress Display twice during playback Checking the audio signal formatAbout audio signals TV Virtual SurroundTo cancel the setting Refer to the following explanations given for each itemSelect OFF in Step Sound Adjustments Press Subtitle during playback Displaying the SubtitlesPress Angle during playback Press Angle repeatedly to select the angle numberTo turn off the subtitles Reduces the block noise Reduces the block noise more thanEnjoying Movies Default setting is underlined Adjusting the PlaybackTo cancel the BNR setting Picture Custom Picture ModePress C/c to select Digital Picture Digital VideoTo cancel the Digital Video Enhancer setting Custom Parental Control Locking Discs CustomParental Control limited playback To turn off the Custom Parental Control functionTo play a disc for which Custom Parental Control is set To turn off the Parental Control function If you have not entered a passwordPress X/x to select Player t, then press Enter Press X/x to select LEVEL, then press EnterControl Bar appears Changing the passwordTo play a disc for which Parental Control is set Area CodeBy pressing You can If you make a mistake entering your passwordControlling other TVs with the remote Code numbers of controllable TVsFor U.S./Canadian models RMT-D143A Manufacturer Code number Press X/x to select the setup item from the displayed list Using the Setup DisplayPress Display when the player is in stop mode Press X/x to select SETUP, then press EnterSelect a setting using X/x, then press Enter Color System Video CD only For Asian/Oceanian models only Settings for the DisplayAuto Power OFF For U.S./Canadian models only Custom Settings CustomSettings for the Sound Setting the digital output signal Downmix DVD onlyDolby Digital DVD only DTS DVD only Mpeg DVD only For Asian/Oceanian models onlySound TroubleshootingPower PictureMP3 audio track cannot be played Following message appears when you play a Data CDDisc does not play Playback stops automaticallyFirst three When letters/numbers appear DisplayCharacters Action Service Number Self-diagnosis FunctionGlossary Track TitleSpecifications Code Language Language Code ListNumerics Index