Sony DVP-NC615 operating instructions Settings for the Sound

◆PAUSE MODE (DVD only)

Selects the picture in pause mode.

AUTO	The picture, including subjects
	that move dynamically, is
	output with no jitter. Normally
	select this position.
FRAME	The picture, including subjects
	that do not move dynamically,
	is output in high resolution.

◆TRACK SELECTION (DVD only)

Gives the sound track which contains the highest number of channels priority when you play a DVD on which multiple audio formats (PCM, DTS, MPEG audio or Dolby Digital format) are recorded.

OFF	No priority given.
AUTO	Priority given.

Notes

•When you set the item to “AUTO,” the language may change. The “TRACK SELECTION” setting has higher priority than the “AUDIO” settings in “LANGUAGE SETUP” (page 62).

•If you set “DTS” to “OFF” (page 67), the DTS sound track is not played even if you set “TRACK SELECTION” to “AUTO.”

•If PCM, DTS, MPEG audio and Dolby Digital sound tracks have the same number of channels, the player selects PCM, DTS, Dolby Digital, and MPEG audio sound tracks in this order.

◆MULTI-DISC RESUME (DVD/VIDEO CD only)

Switches the Multi-disc Resume setting on or off. Resume playback can be stored in memory for up to 6 different DVD/VIDEO CD discs (page 32).

ON	Stores the resume settings in
	memory for up to 6 discs (The
	settings remain in memory even
	if you select “OFF.”)
OFF	Does not store the resume
	settings in memory. Playback
	restarts at the resume point only
	for the current disc in the player.

Settings for the Sound

(AUDIO SETUP)

“AUDIO SETUP” allows you to set the sound according to the playback and connection conditions.

Select “AUDIO SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 61).

The default settings are underlined.

The on-screen displays differ depending on the player model.

AUDIO SETUP

AUDIO ATT:	OFF
AUDIO DRC:	STANDARD
DOWNMIX:	DOLBY SURROUND
DIGITAL OUT:	ON
DOLBY DIGITAL:	D-PCM
DTS:	OFF

◆AUDIO ATT (attenuation)

If the playback sound is distorted, set this item to “ON.” The player reduces the audio output level.

This function affects the output of the LINE OUT L/R (AUDIO) jacks.

OFF	Normally, select this position.
ON	Select this when the playback sound
	from the speakers is distorted.

◆AUDIO DRC (Dynamic Range Control) (DVD only)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “AUDIO DRC.” This affects the output from the following jacks:

– LINE OUT L/R (AUDIO) jacks

– DIGITAL OUT (COAXIAL) jack only when “DOLBY DIGITAL” is set to “D- PCM” (page 66).

STANDARD	Normally select this position.
TV MODE	Makes the low sounds clear
	even if you turn the volume
	down.
WIDE	Gives you the feeling of being
RANGE	at a live performance.

Settings and Adjustments

c continued 65