Sony DVP-NS50P Hooking Up the Player, Unpacking, Inserting Batteries Into the Remote

Hookups

Hooking Up the Player

Follow steps 1 to 6 to hook up and adjust the settings of the player.

Notes

•Plug cords securely to prevent unwanted noise.

•Refer to the instructions supplied with the components to be connected.

•You cannot connect this player to a TV that does not have a video input jack.

•Be sure to disconnect the power cord of each component before connecting.

Step 1: Unpacking

Check that you have the following items:

•Audio/Video cord (phono plug ⋅ 3 y phono plug ⋅ 3) (1)

•Remote commander (remote) (1)

•Size AA (R6) batteries (2)

•A plug adaptor is included with some models

Step 2: Inserting Batteries Into the Remote

You can control the player using the supplied remote. Insert two Size AA (R6) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment. When

using the remote, point it at the remote sensor on the player.

Notes

•Do not leave the remote in an extremely hot or humid place.

•Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

•Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a malfunction.

•If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

16