Sony DVP-NS50P operating instructions Settings for the Sound, Audio Setup

◆PAUSE MODE (DVD VIDEO/DVD-RW only)

Selects the picture in pause mode.

AUTO	The picture, including subjects
	that move dynamically, is
	output with no jitter. Normally
	select this position.
FRAME	The picture, including subjects
	that do not move dynamically,
	is output in high resolution.

◆TRACK SELECTION (DVD VIDEO only)

Gives the sound track which contains the highest number of channels priority when you play a DVD VIDEO on which multiple audio formats (PCM, DTS, or Dolby Digital format) are recorded.

OFF	No priority given.
AUTO	Priority given.

Notes

•When you set the item to “AUTO,” the language may change. The “TRACK SELECTION” setting has higher priority than the “AUDIO” settings in “LANGUAGE SETUP” (page 59).

•If you set “DTS” to “OFF” (page 63), the DTS sound track is not played even if you set “TRACK SELECTION” to “AUTO.”

•If PCM, DTS, and Dolby Digital sound tracks have the same number of channels, the player selects PCM, DTS, and Dolby Digital sound tracks in this order.

◆MULTI-DISC RESUME (DVD VIDEO/ VIDEO CD only)

Switches the Multi-disc Resume setting on or off. Resume playback can be stored in memory for up to 6 different DVD VIDEOs/ VIDEO CDs (page 26).

ON	Stores the resume setting in
	memory for up to six discs.
OFF	Does not store the resume
	setting in memory. Playback
	restarts at the resume point only
	for the current disc in the player.

Settings for the Sound

(AUDIO SETUP)

“AUDIO SETUP” allows you to set the sound according to the playback and connection conditions.

Select “AUDIO SETUP” in the Setup Display. To use the display, see “Using the Setup Display” (page 58).

The default settings are underlined.

AUDIO SETUP

AUDIO ATT:		OFF
AUDIO DRC:		STANDARD
DOWNMIX:	DOLBY SURROUND
DIGITAL OUT:		ON
DOLBY DIGITAL:		D-PCM
DTS:		OFF
48kHz/96kHz PCM:		48kHz/16bit

◆AUDIO ATT (attenuation)

If the playback sound is distorted, set this item to “ON.” The player reduces the audio output level.

This function affects the output of the LINE OUT L/R (AUDIO) jacks.

OFF	Normally, select this position.
ON	Select this when the playback sound
	from the speakers is distorted.

◆AUDIO DRC (Dynamic Range Control) (DVD VIDEO/DVD-RW only)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “AUDIO DRC.”

This function affects the output from the following jacks:

– LINE OUT L/R (AUDIO) jacks

– DIGITAL OUT (COAXIAL) jack only when “DOLBY DIGITAL” is set to “D- PCM” (page 63).

STANDARD	Normally select this position.
TV MODE	Makes low sounds clear even if
	you turn the volume down.
WIDE	Gives you the feeling of being
RANGE	at a live performance.

62