Sennheiser 250 instruction manual Folding up the headset

Page 19

Folding up the headset

For space-savingtransportation, the headset can be folded up in different ways:

To fold up the headphones as flat as possible:

￿Rotate the earcups by 90° and turn the microphone boom flat as shown.

To fold up the headphones as compact as possible:

￿Tuck the earcups between the headband as shown.

For safe transportation of the headset, use the supplied soft case and fold the headset as follows:

￿Rotate the earcups by 90°.

￿Turn the microphone boom flat as shown.

￿Pull out the right earcup and then fold it in.

￿Place the headset flat into the soft case as shown.

The two AAA size batteries can be inserted into the two straps at the side of the soft case.

The accessories can be transported in the cover of the soft case:

Audio cable (3.5 mm)

Audio cable (2.5 mm)

MZW 46 wind and pop shields

18

Image 19
Contents Hmec Contents Important safety instructions Not in use Delivery includes Hmec 250 headset Page TalkThrough button TT Volume + buttonTT Volume button Operating elementsLED indications Preparing the headset for use Connecting the headsetInserting the batteries Connecting a mobile telephone Connecting an additional audio player Switching between mono and stereo mode Adjusting the microphone sensitivityAdjusting the headset Using the headsetAttaching the cable clip Adjusting the volume Adjusting the volume of the TalkThrough function Switching the TalkThrough function on/offPress the TT Volume + button Switching NoiseGard on/off Replacing the batteries Folding up the headset Replacing the earpads Care and maintenanceReplacing the wind shield Accessories and spare partsHeadphones SpecificationsGeneral data Microphone incl. preamplifier Connector assignmentManufacturer declarations