Sennheiser 250 instruction manual Delivery includes

Page 5

Intended use of the headset

Intended use includes:

yhaving read these instructions, especially the chapter “Important safety instructions” on page 2,

yusing the headset within the operating conditions and limitations described in this instruction manual.

Improper use means using the headset other than as described in these instructions, or under operating conditions which differ from those described herein.

Delivery includes

Delivery of the HMEC 250 headset includes:

1 HMEC 250 headset

1 soft case

1 cable clip

2 MZW 46 wind and pop shields

1audio-in cable for mobile telephones, length 0.6 m, with two 2.5 mm jack plugs

1audio-in cable for additional audio players, length 0.6 m, with two 3.5 mm jack plugs

2 AAA size batteries

1 instruction manual

4

Image 5
Contents Hmec Contents Important safety instructions Not in use Delivery includes Hmec 250 headset Page TT Volume button TT Volume + buttonOperating elements TalkThrough buttonLED indications Inserting the batteries Connecting the headsetPreparing the headset for use Connecting a mobile telephone Connecting an additional audio player Switching between mono and stereo mode Adjusting the microphone sensitivityAttaching the cable clip Using the headsetAdjusting the headset Adjusting the volume Press the TT Volume + button Switching the TalkThrough function on/offAdjusting the volume of the TalkThrough function Switching NoiseGard on/off Replacing the batteries Folding up the headset Replacing the earpads Care and maintenanceReplacing the wind shield Accessories and spare partsGeneral data SpecificationsHeadphones Microphone incl. preamplifier Connector assignmentManufacturer declarations