Basic functions, Loading a disc | Technicolor

DTH190_EN 9/07/02 17:43 Page 14

Basic functions

Navigation keys

Loading a disc

Loading a “single-sided” disc

1.Open the disc tray by pressing the

OPEN / CLOSE key.

2.Insert a disc. The disc label must face upwards (Audio CD, Video CD, single-sided DVD (1), etc.)

3.Close the disc tray by pressing the

OPEN / CLOSE key.

1.Double-sided discs have a small label on both sides near the centre. With most DVDs, a disc-specific menu appears. In that case, follow the instructions.

Playing a disc

Disc playback starts as soon as the tray is closed (if programmed k page 16). If it doesn’t start automatically, press PLAY.

•With a DVD, the disc menu appears. Press OK to start playback or select another option (4), in the disc menu using the Navigation keys. To validate your selection, press OK.

•With an audio CD or video CD, playback starts.

To access a specific CD track, DVD title or chapter, press the INFO key to display the Info banner (k page 11) or press Pr +.

To stop playback momentarily (2) press STOP once. Press twice to stop it completely (3).

2.The player has memorised the last scene on the disc. If you now press PLAY: playback starts from this point. To erase Resume memory, press STOP.

Resume memory does not work with interactive discs (without elapsed play time information).

3.If the player is left in STOP mode for more than 2 minutes without any user interaction, a screen saver will be activated (fade in / fade out). After about 30 minutes have elapsed in STOP mode without user interaction, the player will be automatically switched off.

4.Depending on the DVDs, it may be possible to

change the	language during playback
(k page 23).

Quick search of images or a track

In Play mode, start the Forward or Reverse fast motion playback (1) using the FWD or REV keys (2).

1.Press once or several times for higher speeds.

2.You can also use the player keys.

• In search mode, no sound is heard on DVDs.