Programming playback

DTH220E_EN 22/03/02 11:08 Page 17

Navigation keys

To use the programmed play function, you must first make up the list of music tracks (CD) or chapters (DVD) you want to play. You can memorise up to 20 tracks or chapters.

1.Select Edit Program using the Navigation keys. The programming menu appears.

2.Follow instructions a, b, c, d to make up your selection.

a.Choose a title then a chapter (or a track only for an Audio CD) using the Navigation keys or the remote control number keys.

b.Select Add (1) then press OK to validate. Check that the title has been memorised in table (2).

c.Repeat steps a and b as many times as you wish.

d.Select Play and validate by pressing OK to start programmed playback (2).

1.To remove a chapter or a track, select Delete and press OK to validate. If you want to insert a title between 2 other titles Add will be replaced

by Insert.

2.With an audio CD, the track of the song and its playing time will appear in the table. With a DVD, the title and chapter numbers will be displayed in the table.

3.To exit the programming function, press the RETURN key on the remote control.

Programmed play (for DVDs and Audio CDs)

Select Program Play if you want to listen to an audio CD or watch a DVD in the order that you have

pre-programmed using a list (1). To choose the playback order, refer to the next page and select Edit Program to display the list.

1. If you haven’t made up your list, programmed play will not be possible.