Lock, DVD lock Player | Technicolor - Thomson DTH220E guide

DTH220E_EN 22/03/02 11:08 Page 24

lock

Navigation keys

To enable the Lock Player function, you must enter a password. The Ratings Limits function enables you to control the type of discs or programs that your family can watch. If certain discs contain information or scenes that exceed the rating limit you’ve set, they will not be played. There are 8 rating levels.

Load a disc and press STOP. The player menu appears.

1.Select Lock using the Navigation keys,

2.press OK to validate,

3.select a function using the Navigation keys,

4.adjust the setting using the Navigation keys.

DVD - lock Player

1.Select the Lock Player line and press OK to validate.

2.You are requested to enter a “new password”. Enter your four-digit number (1) using the remote control number keys, then press OK to validate.

3.You are requested to confirm. Repeat the operation.

•To disable the lock, select the Unlock Player line and press OK to validate.

•To change your password, select the Change Password line and press OK to validate. Enter your new 4-digit code. Enter it once more to confirm.

1.Choose a four-digit number that you will be able to remember easily or note it down.

• If you’ve forgotten your password, consult the Troubleshooting guide at the end of this manual (k page 25).

DVD - Ratings limits (1)

Choose the rating limit: select Rated Titles then press OK to validate. Select the level using the Navigation keys, then press OK to validate.

• Non-indexed titles can all be freely accessible or require a password: select Unrated Titles then press OK to validate. Select “Free Access” or “Password Required” then press OK to validate.

1. This function is only available on DVDs for 1. In Europe, very few discs have rating limits. which the publisher has set a rating limit. It

therefore depends on the disc.