2_DTH231_EN 21/08/03 15:50 Page 4
Connections and initial set up
1 | 2 | 4 | 3 |
6 5
The back of your DVD player
Sockets and cables
There are several ways in which you can incorporate your DVD player into an
RCA sockets and
cables for analogue
L and R audio
signal.
Optical socket and
cable for digital
audio signal.
Coaxial socket and
cable for digital
audio signal.
Audio sockets and cables (for sound)
1- Audio Out L / R
Analogue sound of a disc being played is permanently available on the two L and R sockets on your player. If you do not use the recommended Scart- Peritel connection to the TV set (paragraph 1 on page 3), you must, in addition to one of the video connections (CVBS ;
Note: audio sockets and cables are usually identified by a colour code (red for the left channel and white for the right channel).
2 - Optical and coaxial Out sockets
The digital sound of a disc being played is permanently available on the optical and coaxial sockets of your player. Use one of these sockets by connecting it to a decoder or a DTS or Dolby Digital amplifier. Some of these appliances are equipped with a coaxial In socket (COAXIAL) or an optical In socket (OPTICAL), while others are equipped with both sockets. Choose one of the two connections.
Note: In most cases these two types of connection give similar results; the only difference lies in the type of cable used and the cost of these cables, the coaxial cable being the least expensive one to buy. However it sometimes happens that some coaxial cables are parasitised by high frequency interference caused by household electrical appliances, high voltage electric cables or radio transmitters.
4