Technicolor - Thomson ITC008 manual Connections, Scart cable AV1, Scart cable AV2

Page 8

ITC008_en 3/03/03 16:33 Page 8

Connections

The scart cable AV1 (1)

The scart cable AV1 allows you to connect a VCR or camcorder (VHS, 8 mm), a Canal + decoder, a video game machine or devices supplying a RGB signal.

You may also connect a digital decoder cable/earth/satellite, an analog satellite receiver or a DVD player.

If your TV set is equipped with a single video socket you can also connect a video recorder or an S-VHS or Hi-8 camcorder to it.

1

The scart cable AV2 (2)

(If included)

The scart cable AV2 allows you to connect a VCR or camcorder (VHS, 8 mm,S-VHS or Hi-8).

You may also connect a digital decoder cable/earth/satellite, an analog satellite receiver or a DVD player.

When you turn off the connected device, and if you have not changed channel during viewing, the TV set automatically returns to the previously watched channel. If the TV set has been turned on by the VCR, it will return to stand-by as soon as the VCR is switched off.

Front Audio/Video /S-Vidéo sockets (3)

(sur modèles équipés)

The Audio/Video sockets allow you to connect a VHS- or 8 mm-camcorder. The Audio/S-Video sockets allow you to connect a VHS- or Hi 8-camcorder.

To view images produced by an appliance connected: To the AV1 peritel socket: press the AV key to select AV1 or AV1S (in the case of an S-Video appliance). To the AV2 peritel socket: press the AV key to select AV2 or AV2S (in the case of an S-Video appliance). To the Audio / Video / S-Video sockets: press the AV key to select AV3 or AV3S (in the case of an S-Video appliance). On some models AV3 and AV3S are not accessible; in this case select AV2 or AV2S (in the case of an S-Video appliance).

Some appliances (connected to the AV1 or AV2 sockets) automatically produce a switching signal. Therefore you do not need to press the AV key to make a selection.

Not to degrade the picture and sound quality, do not turn on the devices connected to the scart socket and to the Audio/Video socket at the same time.

3

The Headphone socket (4) (If included)

The headphone adapter allows you to connect a stereo headphone or earphone plugs; the loudspeakers sound is then muted.

Volume may be adjusted through keys VOL+/-.

2

4

ITC 008 / EN - BEI / RDG - 03/03/2003

8

Image 8
Contents About the On/Off switch For your safetyAbout cleaning About this manualTake them back Set-upInserting batteries 2 x LR 03-AAA Display of channel, stand-by time INFO. Videotext keys Text Remote ControlsTo switch your machine on / off stand-by About the TV set Channels OrganisationAdjusting the Picture Adjusting the SoundManual Channel Set-up With the manual set-upDaily use Videotext Connections Scart cable AV1Scart cable AV2 Front Audio/Video /S-Vidéo sockets