To configure the remote control
1.Select External Control
2.Select IR Remote
3.Select which bank or set of IR codes for Vision to respond to. The selected bank (R1, R2, R3, or R4) should correspond to the selected bank of codes on your IR remote. The default is Escient – R1.
To view information about your Vision
1.Select Utilities
2.Select System Information
3.View information about your Vision system.
To shutdown or power off your Vision
1.Select Utilities
2.Select Restart System
3.Select Shutdown or Press and hold the front panel power button for about 10 seconds until the LED turns off.
To manually check for software updates using your Internet connection
1.Select Utilities
2.Select Software Update
3.Select Check for Update
To view information about the content on your Vision
1.Select Utilities
2.Select My Content
3.Select Movies, Music, or Photos
4.View information about the selected type of media.
To delete movies and music from your Vision
1.Select Utilities
2.Select Delete Media
3.Select Movies or Music
4.Navigate the list and locate the media you want to delete from your Vision system.
5.Press the OPTIONS button on the remote.
6.Select DELETE to confirm the permanent removal of the selected media.
To delete photos from your Vision
Deleting Photos can only be accomplished from a PC over your network.
1.Connect to your Vision using its IP address or its Server Name if you have a Windows network.
2.Select the PHOTOS volume
3.Delete the folders or individual photos that you want removed from your Vi- sion by dragging them from the PHOTOS volume to the trash on your PC.
To restart your Vision
1.Select Utilities
2.Select Restart System
3.Select Restart
Escient Vision VS & VC User’s Guide | 28 |
Version: |