Symphonic WF319E owner manual To Change Clock Setting, Automatic Clock Setting, Please Note

In the example below, the clock is to be set to:

DATE	May 6th, 2004
SETTING TIME	5:40PM

8Start the clock

Press the MENU button on the

remote control.

5:40 PM

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L button to point to “SETTING CLOCK”.

Then, press the F.FWD/B button.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

Although seconds are not displayed, they begin counting from 00 when you press the MENU button on the remote control. Use this feature to synchronize the clock with the correct time.

NOTE:

When unplugging the AC cord or if there is a power failure for more than 3 seconds, you may have to reset the clock.

2Select “MANUAL CLOCK SET”

Press the PLAY/K or STOP/L	– SETTING CLOCK –
button to point to “MANUAL	AUTO CLOCK	[ON]
CLOCK SET”.	AUTO CLOCK CH SEARCH
	B MANUAL CLOCK SET	[ 02 ]
	AUTO CLOCK CH
Then, press the F.FWD/B button.	D.S.T.	[OFF]

TO CHANGE CLOCK SETTING

If you want to change the clock, 1)Follow steps [1] and [2].

2)Select where you want to change using the F.FWD/B or REW/s button.

3Select the month

Press the PLAY/K or STOP/L button until your desired month appears. (Example: May → 05)

Then, press the F.FWD/B button.

4Select the day

Press the PLAY/K or STOP/L but- ton until your desired day appears. (Example: 6th → 06)

Then, press the F.FWD/B button.

– MANUAL CLOCK SET –

MONTH		DAY	YEAR
0 5 /		– – – – – – – – –
HOUR		MINUTE
– – :		– –	– –
– MANUAL CLOCK SET –
MONTH		DAY	YEAR
0 5	/	0 6 – – – – – – –
HOUR		MINUTE
– – :		– –	– –

3)Enter correct numbers using the PLAY/K or STOP/L button.

4)Press the MENU button on the remote control to start the clock.

PLEASE NOTE:

If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.

AUTOMATIC CLOCK SETTING

Make sure ...

5Select the year

Press the PLAY/K or STOP/L but- ton until your desired year appears. (Example: 2004)

Then, press the F.FWD/B button.

6Select the hour

Press the PLAY/K or STOP/L but- ton until your desired hour appears. (Example: 5, PM)

Then, press the F.FWD/B button.

7Select the minute

Press the PLAY/K or STOP/L but- ton until the desired minute appears. (Example: 40)

– MANUAL CLOCK SET –

MONTH		DAY		YEAR
0 5	/	0 6	THU	2 0 0 4
HOUR		MINUTE
– –	:	– –	– –
– MANUAL CLOCK SET –
MONTH		DAY		YEAR
0 5	/	0 6	THU	2 0 0 4
HOUR		MINUTE
0 5	: – –		PM
– MANUAL CLOCK SET –
MONTH		DAY		YEAR
0 5	/	0 6	THU	2 0 0 4
HOUR		MINUTE
0 5	:	4 0	PM

•The TV/VCR is turned on.

•Confirm the TV/VCR is receiving a RF (Radio Frequency) signal from either an antenna or cable system connection using the ANT. terminal on the rear of the TV/VCR.

NOTE:

•If a cable converter box is being used, make sure it is powered on.

•You must use the TV/VCR remote control to per- form the clock setting procedure.

•If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box (usually chan- nel 3 or 4), to be able to set up or correct the clock automatically.

- 11 - EN

9I03