Symphonic WF319E owner manual To Cancel the DAYLIGHT-SAVING Time, Auto Clock CH

1Select “SETTING CLOCK”

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to select “SETTING CLOCK”. Press the F.FWD/B button to enter “SETTING CLOCK” menu.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

5Turn off the TV/VCR

Once the TV/VCR is turned off , it will periodically check and set the correct date and time.

DAYLIGHT-SAVING TIME

2 Set “AUTO CLOCK” to [ON]	– SETTING CLOCK –
Press the F.FWD/B button until	B AUTO CLOCK	[ON]
“AUTO CLOCK [ON]” appears.	AUTO CLOCK CH SEARCH
	MANUAL CLOCK SET	[ 02 ]
	AUTO CLOCK CH
	D.S.T.	[OFF]

3Begin “AUTO CLOCK CH SEARCH”

Select this feature and the TV/VCR’s clock automati- cally will advance one hour in April, then reverse one hour in October.

When Daylight-Saving Time is ON, the clock will change automatically as follows:

• First Sunday of April : At 2 AM the clock imme-

diately changes to 3 AM. Any timer programming

you have set to occur between 2 AM and 3 AM

will not record.

Press the STOP/L button to select

“AUTO CLOCK CH SEARCH”. Press the F.FWD/B button.

• The TV/VCR is now searching

for the station which contain the

– SETTING CLOCK –

AUTO CLOCK [ON]

BAUTO CLOCK CH SEARCH

AUTO CLOCK CH	[ 02 ]
MANUAL CLOCK SET
D.S.T.	[OFF]

• Last Sunday of October : At 2 AM the clock

immediately changes to 1 AM.

Make sure ...

•Press the POWER button to turn on the TV/VCR.

auto clock set signal. The search

for a signal may take up to 20

seconds per channel.

1 Select “SETTING CLOCK”

Press the MENU button on the

remote control.

– M E N U –

•	“_ _” appears at the lower left of	– AUTO CLOCK CH SEARCH –
	the screen when the search has	08	10	13

ended.

• Auto Clock station- write down

the number(s) that appear on the _ _

Press the PLAY/K or STOP/L but-

ton to point to “SETTING

CLOCK”.

Then, press the F.FWD/B button.

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

screen. These are the auto clock station(s) in your area. See item 4 below.

•If no number(s) appear on the TV screen, there are no stations in your area which contain the Auto Clock signal. Auto Clock Setting is not possible. Please use Manual Clock Setting on page 11.

Press the MENU button to exit the screen. NOTE: During Auto Clock CH Search, the picture may be distorted. This is normal.

4Enter the channel number that contains the Automatic Clock Setting Signal

2Set “D.S.T.” (Daylight-Saving Time) to [ON]

Press the PLAY/K or STOP/L but-	– SETTING CLOCK –
ton to point to “D.S.T.”.	AUTO CLOCK	[ON]
Then, press the F.FWD/B or	AUTO CLOCK CH SEARCH
	MANUAL CLOCK SET	[ 02 ]
	AUTO CLOCK CH
REW/s button until [ON] appears.	B D.S.T.	[ON]

3Exit the Daylight-Saving Time mode

Press the MENU button on the remote control to return to TV mode.

Press the MENU button on the remote control.

Press the PLAY/K or STOP/L but- ton to select “SETTING CLOCK”. Press the F.FWD/B button to enter “SETTING CLOCK” menu.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN

TIME SEARCH

–SETTING CLOCK –

TO CANCEL THE DAYLIGHT-SAVING TIME

Repeat steps [1] to [2], select [OFF] using the F.FWD/B or REW/s button.

Press the STOP/L button to select

“AUTO CLOCK CH”.	AUTO CLOCK	[ON]
	B AUTO CLOCK CH	[ 45]
	AUTO CLOCK CH SEARCH
Press the F.FWD/B or REW/s	MANUAL CLOCK SET
	D.S.T.	[OFF]

buttons until you locate Auto Clock Set station number. See item 3 above.

Press the MENU button to exit the screen.

- 12 - EN

9I03