Connecting the power cable, 12 En | Yamaha DVD Player, DVD-S1700

CONNECTIONS

■HDMI jack <A>

HDMI (High-Definition Multimedia Interface) provides high quality digital audio and video on a single connection. Connect HDMI jack of this unit to the HDMI input jack of your AV receiver, and then to that of your TV using a commercially available HDMI cable.

If your receiver does not have HDMI output jack, you can achieve a better video image by connecting HDMI jack of this unit directly to the HDMI input jack of your TV.

Notes

•To output HDMI signals, set the HDMI mode to “on” by pressing HDMI button on the remote control.

•You can use an HDMI-DVI converter cable in order to connect this unit to HDCP-compatible DVI-D components. In this case, you need to use another audio connection in addition to this connection because no audio signals are output.

■Composite video jack <B>

Connect VIDEO OUT (VIDEO) jack of this unit to the video input jack of your AV receiver, and then to that of your TV using the supplied video pin cable.

■S-video jack <C>

S-video connections achieve a clearer picture than composite video connections by transmitting video signals on separate wires for luminance (Y) and chrominance (C). Connect VIDEO OUT (S VIDEO) jack of this unit to S-video input jack of your AV receiver, and then to that of your TV using a commercially available S-video cable.

■Component video jacks <D>

Component video connections achieve higher fidelity color reproduction than S-video connections by transmitting video signals on separate wires for luminance (Y: green) and chrominance (PB: blue, PR: red). Connect VIDEO OUT (COMPONENT) jacks of this unit to the component input jacks of your AV receiver, and then to those of your TV using a commercially available component cable. Observe the color of each jack when you make connections.

If your receiver does not have component output jacks, you can achieve a better video image by connecting the component output jacks of this unit directly to the component input jacks of your TV.

■SCART terminal <E>

(U.K. and Europe models only)

If your TV has only a terminal for video input, you can connect the TV directly to this unit.

Connect AV terminal of this unit to SCART input terminal of your TV using a commercially available SCART cable.

Note

•Ensure that the “TV” indication on SCART cable is connected to the TV set and “DVD” indication on SCART cable is connected to this unit.

Connecting the power cable

After all other connections are complete, plug the supplied power cable into MAINS of this unit and then plug the power cable to an AC outlet.

To an AC outlet

MAINS