Function | Problems | Possible causes and remedies |
Recording | The cassette is ejected when |
| you press REC r. |
∙The safety tab of the cassette has been removed.
/Cover the tab hole with adhesive tape, or use another cassette with a safety tab. (page 19)
Recording cannot be done. | ∙ No cassette has been inserted. |
| /Insert a cassette with the safety tab. |
| ∙ The tape is at its end. |
| /Rewind the tape. |
Timer | Timer settings cannot be |
recording | made. |
∙The clock has not been set.
/Set the current time and date. (page 15)
∙You have made a mistake when setting the timer.
/Check the setting steps. (pages 25 to 27)
| The cassette is ejected when | ∙ The safety tab of the cassette has been removed. | ||
| you press TIMER REC ON/ | /Cover the tab hole with adhesive tape, or use another | ||
| OFF. | cassette with a safety tab. | ||
|
|
|
| |
| The TIMER REC lamp does | ∙ No cassette has been inserted. |
|
|
| not light up even though you | /Insert a cassette with its safety tab. | ||
| press TIMER REC ON/OFF. | ∙ The tape is at its end. | ||
|
| /Rewind the tape. | ||
|
| ∙ No setting is made for timer recording. | ||
|
| /Set the program for timer recording. (pages 25 to 27) | ||
|
|
|
| |
| Timer recording was not | ∙ You did not press TIMER REC ON/OFF. | ||
| made. | ∙ There has been a power interruption. | ||
|
|
|
| |
Others | A cassette cannot be inserted. | ∙ Another cassette is already inserted. | ||
|
| /Press EJECT 6 to eject the cassette. | ||
The Remote Commander does not work.
∙The batteries are low.
/Replace the batteries. (page 4)
∙The batteries are installed incorrectly.
/Install the batteries with correct polarities. (page 4)
36
Additional Information