3Begin OTR
OTR(2 : 30)
Press the REC/OTR button on the TV/VCR as many times as needed. The recording length will be deter- mined by the number of times you
SP
press the REC/OTR button. Each
additional push will increase the recording time by 30 minutes. It is set up to 8 hours.
Push(es) | Display |
| Recording length |
1 push |
| (normal recording) | |
2 pushes | 0:30 |
| 30 minutes |
3 pushes | 1:00 |
| 60 minutes |
|
|
|
|
17 pushes | 8:00 |
| 480 minutes |
|
|
|
|
Avoid over lap of programs ...
There is a chance that a program will not be record- ed. when programs overlap;
•The program with an earlier start has priority.
•Once the earliest program finishes, the overlapping programs will begin recording in sequence.
Recording Sequence
Program 1
9:00AM | 10:00AM | 11:00AM | 12:00PM |
*Recording period is SHADED
•The illustration below demonstrates the sequence of recordings.
TIMER RECORDING
You may set the TV/VCR to start and end a record- ing while you are away. You can set 8 programs to record on specific days, daily or weekly within a 1 year period.
In the example below, the timer is being set to record:
DATE: | July 6th, 2001 |
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL: CH61
TAPE SPEED: SP
1 Select “TIMER PROGRAM-
MING”
Press the MENU button on the remote control.
Confirm “TIMER PROGRAM-
MING” is pointed by pressing the PLAY/K button. And press the F.FWD/B button.
•If you have not yet set the clock, “MANUAL
CLOCK SET” appears. If so, fol-
low stops [3] to [8] on page 15. CH DATE BEGIN END Then set the timer recording.
Make sure ... |
|
|
|
|
|
|
|
• If a cable box or satellite box is connected with the |
|
|
|
|
|
|
|
2 Select your desired program |
|
|
|
|
|
| |
TV/VCR you will be limited to record only one |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
channel. And the channel selector on the TV/VCR | position (1~8) |
|
|
|
|
|
|
must be selected to the output channel of the boxes | Press the PLAY/K or STOP/L but- |
| – TIMER PROGRAMMING – | ||||
| CH DATE | BEGIN END | |||||
CH 3 or CH 4 and then the actual channel to be | ton to select the desired program |
| |||||
- - | - - - | ||||||
recorded must be selected on the boxes. | position. | - - | - - - | ||||
- - | - - - | ||||||
| B 61 | - - - | |||||
• Clock must be set to the correct time and date | Then, press the F.FWD/B button. | - - | - - - | ||||
- - | - - - | ||||||
- - | - - - | ||||||
before setting the timer. |
| - - | - - - | ||||
|
|
|
|
|
|
| |
• TV/VCR power must be turn on to program it. |
|
|
|
|
|
|
|
• Insert a cassette tape with its erase prevention tab | 3 Set the channel number |
|
|
|
|
|
|
in place. (If necessary, rewind or fast forward the | Press the PLAY/K or STOP/L button until the |
| |||||
tape to the point at which you want to begin |
| ||||||
desired channel number appears. |
|
|
|
|
|
| |
recording.) |
|
|
|
|
|
| |
(Example: CH61) |
|
|
|
|
|
| |
• The channel you want to record is properly set in |
|
|
|
|
|
| |
Then, press the F.FWD/B button. |
|
|
|
|
|
| |
advance. |
|
|
|
|
|
| |
Remember: If the TV/VCR is con- |
|
|
|
|
|
| |
|
|
|
|
|
|
| |
| nected to a cable box or satellite |
| – TIMER PROGRAMMING – | ||||
| box, the TV/VCR must be on CH3 |
| CH DATE | BEGIN END | |||
| - - |
| |||||
| or CH4, then the channel to be | - - - | |||||
| - - | - - - | |||||
| - - | - - - | |||||
| recorded is selected on the cable |
| B 61 | 7/06 | FRI | ||
| - - | - - - | |||||
|
| - - | - - - | ||||
| box or satellite box. | - - | - - - | ||||
| - - | - - - | |||||
|
|
| – TIMER PROGRAMMING – | ||||
| 4 Select once, every day or |
| |||||
|
| CH DATE | BEGIN END | ||||
|
| - - | - - - | ||||
| weekly recording | - - | - - - | ||||
| - - | - - - | |||||
| For once recording : |
| B 61 EVRY DAY | ||||
| - - | - - - | |||||
| - - | - - - | |||||
|
| - - | - - - | ||||
|
| - - | - - - | ||||
- 21 - |
|
|
|
|
| EN | |