PREPARATION FOR USE
ANTENNA/CABLE CONNECTIONS
Satellite Box or Cable Box (Not supplied)
From Cable System or Satellite Dish 
OUT
IN
Rod Antenna | VHF/UHF Antenna | |
(Not supplied) | ||
(Supplied with 13” model only) | ||
|
VHF Antenna (Not supplied)
From |
|
| UHF Antenna |
| or | (Not supplied) | |
Cable System |
| ||
|
|
| |
|
| VHF/UHF |
|
|
| or Combiner |
|
|
| (Not supplied) |
|
or | ANT. |
| |
|
| ||
|
|
| |
Cable (Not supplied) |
|
|
|
|
| or | Flat |
|
|
|
VHF/UHF COMBINED ANTENNA
The VHF/UHF Rod Antenna (supplied wuth 13” model only) is detachable. Insert the stem of the antenna into the hole on the
NOTE:
Before plugging the Rod antenna into antenna termi- nal, check that the pin is not bent. If it is bent, straighten the pin as illustrated, then plug the pin into antenna terminal.
Bent pin
Cable Plug
(Needs to be straightened) | (Straight pin) |
NOTE:
The connection of an indoor antenna may not always give acceptable TV reception.
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor antenna.
CABLE WITHOUT CONVERTER/ DESCRAMBLER BOX
Use this connection if your cable system connects directly to your TV/VCR without a converter box. By using this connection you can:
1)Use the TV/VCR remote to select channels.
2)Program one or more unscrambled channels for Automatic Timer Recording.
NOTE: This unit will ONLY record and view the same channel.
CABLE WITH CONVERTER/ DESCRAMBLER BOX OR SATELLITE BOX
If your cable service supplies you with a converter box or if you use a satellite system, you can use the basic connection shown here.
By using this connection you can also record scram- bled channels. However, channel selection must be made with the converter box or satellite box. This means that channels cannot be changed using the TV/VCR Remote Control. Unattended timer record- ing is limited to one channel at a time.
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article
- 9 - | EN |