5Select the year
Press the PLAY/K or STOP/L but- ton until your desired year appears. (Example: 2001)
Then, press the F.FWD/B button.
– MANUAL CLOCK SET –
MONTH | DAY | YEAR | |
0 5 | / | 0 1 | TUE 2 0 0 1 |
HOUR |
| MINUTE | |
– – | : | – – | – – |
CHANNEL SET UP AGAIN
Make sure ...
•Press the POWER button to turn on the TV/VCR.
6Select the hour
Press the PLAY/K or STOP/L but- ton until your desired hour appears. (Example: 5, PM)
Then, press the F.FWD/B button.
7Select the minute
– MANUAL CLOCK SET – | |||
MONTH | DAY | YEAR | |
0 5 | / | 0 1 | TUE 2 0 0 1 |
HOUR |
| MINUTE | |
0 5 | : | – – | PM |
1Select “CHANNEL SET UP”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L but- ton to point to “CHANNEL SET UP”.
Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK
BCHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN
TIME SEARCH
Press the PLAY/K or STOP/L but- ton until the desired minute appears. (Example: 40)
– MANUAL CLOCK SET – | |||
MONTH | DAY | YEAR | |
0 5 | / | 0 1 | TUE 2 0 0 1 |
HOUR |
| MINUTE | |
0 5 | : | 4 0 | PM |
2Begin auto preset
– CHANNEL SET UP –
Press the PLAY/K or STOP/L but-
ADD / DELETE CH (TV)
ton to point to “AUTO PRESET”. B AUTO PRESET
8Start the clock
Press the MENU button on the
Then, press the F.FWD/B button. The tuner scans and memorizes all the active channels in your area.
remote control.
5:40 PM
Although seconds are not displayed, they begin counting from 00 when you press the MENU button on the remote control. Use this feature to synchronize the clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power failure for more than 30 seconds, you may have to reset the clock.
3After scanning
The tuner stops on the lowest memorized channel.
DELETING (OR ADDING)
CHANNEL
The channels you no longer receive or seldom watch can be deleted from the memory. (Of course, you can add the deleted channel into the memory again.)
TO CHANGE CLOCK SETTING
If you want to change the clock, 1)Follow steps [1] and [2].
2)Select where you want to change using the F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or STOP/L button.
1Select “CHANNEL SET UP”
Press the MENU button on the remote control. Then press the PLAY/K or STOP/L button to point to “CHANNEL SET UP”. Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK
BCHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN
TIME SEARCH
4)Press the MENU button on the remote control to start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press
2 Select “ADD/DELETE CH” | – CHANNEL SET UP – |
Press the PLAY/K or STOP/L but- | B ADD / DELETE CH (TV) |
ton to point to “ADD/DELETE | AUTO PRESET |
CH”. |
|
Press the F.FWD/B button. |
|
the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.
3Enter the desired channel number
Press the PLAY/K or STOP/L but- ton until your desired channel num- ber appears. (You can also use the number buttons or the CHANNEL K/L button to enter it) (Example: CH8)
08
ADD / DELETE
- 13 - | EN |