NOISE CANCEL (in the Still mode)
This feature allows you to reposition or reduce the noise lines of a still picture.Press the PAUSE/STILL button so that the noise lines change position on the screen so you can see the picture in its entirety with-
RENTAL PLAYBACK
This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes.
out distracting noise lines.
NOTE: This feature can be activated ONLY when viewing a tape recorded in the SLP mode. If the tape was originally recorded in the SP or LP mode, the still picture may revert to black and white in addition to the “noise bars”. This is normal.
1Select “USER’S SET UP”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L but- ton to point to “USER’S SET UP”. Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL SETTING CLOCK CHANNEL SET UP
BUSER’S SET UP LANGUAGE [ENGLISH] ZERO RETURN
TIME SEARCH
VERTICAL HOLD CONTROL
In the Pause/Still mode only, when the picture begins to vibrate vertically, stabilize the picture by pressing the CHANNEL K or L button.
NOTE:
If there are video noise lines on the screen, reposition or reduce them. Refer to “NOISE CANCEL”.
PICTURE CONTROLS
TRACKING ADJUSTMENT
•Tracking adjustment will be set automatically (Digital Tracking function) when you start play- back.
•However when playing
2 Set “RENTAL” to [ON] | – USER’S SET UP – | ||
Press the PLAY/K or STOP/L but- B RENTAL | [ON] | ||
ton to point to “RENTAL”. | REPEAT PLAY | [OFF] | |
AUTO RETURN | [OFF] | ||
| |||
Press the F.FWD/B or REW/s button until [ON] appears.
3Exit the Rental setting
Press the MENU button on the remote control to return to the TV mode.
4Start playback
Press the PLAY button to start playback. “RENTAL PLAY B” appears.
•Once you select the Rental mode, it stays in effect even after you turn off the TV/VCR.
TO CANCEL THE RENTAL MODE
Repeat steps [1] and [2], select [OFF] using the F.FWD/B or REW/s button on the remote control. Press the MENU button on the remote control to return to TV mode.
If there is a power failure of any kind, the unit will retain its memory for this feature.
RECORDING
TWO DIFFERENT TAPE SPEEDS
ERASE PREVENTION
Before recording, select the tape speed from : SP mode (Standard Play) or SLP mode (Super Long Play).
The table below shows the maximum recording/play- back time using T60, T120 or T160 tapes in each mode.
You can prevent accidental erasing of recording by breaking off the tab on the back edge of the cassette.
Tab |
Tape Speed | Recording/Playback Time | |||
|
|
|
|
|
| Type of tape | T60 | T120 | T160 |
|
|
|
|
|
SP mode | 1 hour | 2 hours | ||
|
|
|
|
|
SLP mode | 3 hours | 6 hours | 8 hours | |
|
|
|
|
|
Note: You can play back a tape recorded in LP mode (Long Play).
If you decide to record on the tape again, cover the hole with plastic tape.
Transparent Tape
- 18 - | EN |